Using Gold Nanoparticles with Spectroscopic and Analytical Models for Rapid Colorimetric Detection of Mercury Ions in Aqueous Media
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 2
Abstract
In this study, high-sensitively colorimetric detection of mercury ions was developed according to the surface plasmon resonance of modified gold nanoparticles. While in a citrate buffer solution, the selected modifier Bismuthiol II can cause gold nanoparticles to aggregate. Gold nanoparticles with a spherical shape and average diameter of about 13 nm were prepared. While mercury ions can inhibit gold nanoparticle aggregation, after the addition of mercury ions, the color of the gold nanoparticles solution changes from light violet to red with a hypochromatic shift at the absorption peak. By collecting the UV-Vis spectrum of the solution after the reaction, the characteristic bands are selected to build a partial least squares model. Both the 0.9477 correlation coefficient with a 0.0986 mg/L standard deviation for the calibration set, and 0.9274 correlation coefficient with a 0.1020 mg/L standard deviation for the prediction set were obtained via a partial least squares model.
Authors and Affiliations
Jun HE, Zihan WU, Ming SUN
Keywords
Related Articles
- EP ID EP581449
- DOI 10.5755/j01.ms.25.2.19140
- Views 45
- Downloads 0
Microstructure and Tribological Properties of Micro-arc Oxidation TiO2 Coating Before and After SiC Particles Incorporation
In this work, porous TiO2 coating was fabricated on the surface of commercially pure titanium using the micro-arc oxidation (MAO) technique, and the effect of SiC particles incorporation on the microstructure and tribolo...
Synthesis, Characterization of Metal-Schiff Base Functionalized Mesoporous Silica for Pesticide Adsorption
The mesoporous silica modified by salicylaldimine was prepared through a co-condensation method. Through the bridge effect from metal ion (copper ion, zinc ion, manganese ion), the model drug-avermectin was supported on...
Simulation on the Two-phase Separation of Powder Injection Molding 316L Stainless Steel
By utilizing the FLUENT software, finite element simulation analysis was performed on the two-phase separation of powder injection molding, and the simulation results were verified through experiment. As indicated in the...
Data on Evaluation of the Corrosion Inhibition Effect of L-alpha-aminoisocaproate on High Carbon Steel Corrosion in Dilute Acid Media
Corrosion inhibition performance of l-alpha-aminoisocaproate on high carbon steel in 1 M HCl solution has been studied by weight loss measurement, open circuit potential measurement, optical microscopy and ATF-FTIR spect...
Effect of Solution Heat Treatment and Artificial Aging on Compression Behaviour of A356 Alloy
Aluminium alloys are subjected to heat treatment to increase the strength and corrosion properties. This paper aims to study the effect of heat treatment on the compression behaviour of A356 alloy under quasi static cond...