Using Overall Equipment Effectiveness indicator to measure the level of planned production time usage of sewing machine
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 4
Abstract
The chapter presents the results of utilization of the OEE indicator to measure the level of operating time usage of sewing machine production of air bags. The idea of an OEE indictor, which is a key metrics in Total Productive Maintenance (TPM) program, is presented. The goals and benefits of its calculation are included. The research object – KL 110 air bags sewing machine - what for the machine is used. The calculation of TPM indicators for the analysed machine is presented. The calculation of TPM indicators was undertaken over a period of six months of the machine’s working time. It was indicated that the overall effectiveness of the machine is at a level of 65,7%, the time loss-es were 34,3%. Most of the losses were related to low performance. Only Availability indicator reaches a word class level, if other indicators such as Performance, Quality and OEE should be improved, their value should be increased. Activities to improve the effectiveness of the machine utilization were determined.
Authors and Affiliations
Marek Krynke, Krzysztof Mielczarek
Keywords
Related Articles
- EP ID EP168638
- DOI -
- Views 63
- Downloads 0
AN OFFLINE PATH PLANNING METHOD FOR AUTONOMOUS VEHICLES
Driving a road vehicle is a very complex task in terms of controlling it, substituting a human driver with a computer is a real challenge also from the technical side. An important step in vehicle controlling is when the...
Comparative occupational risk assessment in a CNC machine tool operator position
Law requires from employers to assess occupational risk in workplaces. A well-executed occupational risk assessment promotes the improve-ment of working conditions and reduces a negative impacts on employees’ health and...
Effect of cyclic loading on the internal damping of magnesium alloy AZ31
The article focuses on the analysis of the internal damping changes depending on the amplitude of the magnesium alloy AZ31. Internal damping reflects the ability of the material irreversibly dissipating mechanical energy...
Macroscopic quality evaluation of lacquered steel sheets
This paper deal with the evaluation of quality of lacquered sheets with different pre-treatments after corrosive loading. Samples will be divided into groups according to the type and duration corrosion loadings. After e...
Influence of antimony modification and heat treatment on the AlSi9CuMnNi alloy
Modification of alloys is an important part of the metallurgical process, and this also applies to aluminum alloys, particularly for Al-Si (silumins). As a modification of the material we can utilise the modification usi...