UTILIZATION OF LEVENBERG-MARQUARDT'S METHOD FOR IDENTIFICATION OF THE ELECTRONIC CURRENT TRANSDUCER WITH A HALL EFFECT SENSOR IN A FEEDBACK LOOP
Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 1
Abstract
The utilization of Levenberg-Marquardt's method (LM) for the identification of an unknown model parameters of the electronic current transducer with a Hall effect sensor in the negative feedback loop has been described. The saturation reasons of the electronic block in the transducer model have been also taken into consideration which made it possible to use the model in error analysis of the electronic transducer while deformed signals are being measured in the power electronics and automation.
Authors and Affiliations
JAKUB PIWOWARCZYK, KRZYSZTOF PACHOLSKI
Keywords
Related Articles
- EP ID EP129054
- DOI -
- Views 101
- Downloads 0
MEASUREMENTS OF UNSTEADY FLOW PARAMETERS IN PIPE-RECEIVER AND PIPE-TURBOCHARGER SYSTEMS
In the paper, the characteristic features of an unsteady flow in two systems: a high-volume pipe-receiver and a pipe-turbine are described. The tests were made under the conditions of a pulsating pipe supply in the range...
SEVERAL APPROACHES TO ADC TRANSFER FUNCTION APPROXIMATION AND THEIR APPLICATION FOR ADC NON-LINEARITY CORRECTION
The performance of current electronic devices is mostly limited by analog front-end and analog-to-digital converter's (ADC) actual parameters. One of the most important parameters is ADC nonlinearity. The correction of t...
MIGRATION MEASUREMENTS FROM PLASTIC PACKAGING: A SIMULATION STUDY ON INFLUENCE OF INITIAL CONCENTRATION PROFILE<br />
Migration of components from plastic packaging into foodstuffs or into medicines is a very important issue, concerning public health. Using experimental techniques, like gas chromatography-mass spectrometry, these essays...
TWO-PARAMETER MEASUREMENTS AND SIGNAL CONDITIONING IN DOUBLE-CURRENT SUPPLY FOUR-TERMINAL RESISTANCE CIRCUITS
A new type of the four-terminal (4T) bridge circuit unconventionally supplied by current sources connected in parallel to opposite arms, named double current bridge (2J) is presented. It has two different outputs from bo...
FACTORS LIMITING EXTREMELY SENSITIVE MEASURING RANGES OF CONTEMPORARY PICOAMMETERS<br />
In the paper the principle of operation of contemporary picoammeters with analog conversion of current into voltage has been presented. The influence of factors disturbing the i/u conversion in a passive as well as in an...