UWB Microstrip Line Feeding Planar Modified Circular Antenna
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
In this paper we have investigated compact printed semicircular disc monopole antenna, which is basically printed microstrip antenna with etched ground plane for UWB applications. In particular we have simulated very compact semicircular disc monopole antennas for UWB communication. Simple rectangular microstrip line is used for feeding the printed monopole antenna and its frequency bandwidth under –10 dB return loss is ranging from 3 GHz to 11.6 GHz. This compact printed monopole antenna works well for the whole UWB frequency band 3.1–10.6 GHz.
Authors and Affiliations
L. Pillalamarri
Keywords
Related Articles
- EP ID EP412440
- DOI 10.21272/jes.2018.5(1).e1
- Views 92
- Downloads 0
Mathematical Modeling of the Mechanical Characteristic of the Activated PTFE-Matrix Using the Method of Planning the Experiment
In this paper, the influence of the parameters of the technological process of mechanical activation on the physical characteristics of the polytetrafluoroethylene (PTFE) matrix is investigated. The paper presents a math...
Ecologically Safe Process for Sulfo-Aluminizing of Steel Parts
The present technical solution refers to the field of electrophysical and electrochemical processing of parts, in particular, to the electroerosion alloying (EEA) of the surfaces of steel parts with aluminum (aluminizing...
Optimization of joint recycling process of drilling sludge and phosphogypsum
Joint recycling of drilling sludge and phosphogypsum with obtaining a building material is environmentally appropriate and cost-effective, as it helps not only to prevent environmental pollution, but also to solve the pr...
Comprehensive analysis of the mechanical system "fixture - workpiece"
Present work is devoted to locating and clamping of prismatic parts in fixtures during the machining on drilling-milling-boring machines. The special feature of locating schemes of parts of the present type is that one o...
Application of Rough TOPSIS Technique for the Analysis of Engineering System Failure Causes
The prioritization of the causes of engineering system failure posed to be a challenge. Therefore, there is a need to develop a tool that will be used to identify critical problems of an engineering system to facilitate...