Vehicle Compartment Heat Control Using Phase Change Materials

Abstract

The Phase change materials (PCM) are those have the ability to observe a huge amount of heat during its phase change from solid to liquid. The ability of PCMs is utilized in heat storing, heat removal applications. Temperature shoot up in cars during parking particularly in summer plays an important role in thermal comfort of car-cabin. As the vehicle is not in motion, and the air conditioner is off solar radiation heats up almost the entire cabin, particularly due to the fact that heat transfer co-efficient reduces too minimal as the car is parked. This project is to utilize the heat removal capability of PCM to remove the heat generated due to solar radiation. A thin layer of PCM coating over the car outer surface, particularly on the top and on the wind-shield has been made. CFD is found to be a better alternate in modern industries and has the ability of solving such complex problems. In this project with the help of CFD, a comparative analysis are executed to study the cases such as base car surface with AC off without PCM, base car surface with AC on without PCM, PCM coated where AC off. The comparative temperature pattern inside the cabin is used to understand the thermal comfort in the cabin and advantages of using PCM.

Authors and Affiliations

Natrayan L, Prabhu R

Keywords

Related Articles

A Review on Modular Smartphones: Phonebloks

What would be the first thing which comes in mind when accidently your mobile falls on the solid floor and brakes up? Obviously! You would go to the repair shop and get your mobile repaired. But what if the camera gets...

A Low Power Discrete Time 2nd order Band-pass Sigma Delta Modulator For Wireless LAN Receiver

Sigma delta modulators are the most suitable ADC topologies for digitizing with high resolution analog signals. Band pass sigma-delta modulators have recently received great attention in the academia as well as in the i...

Torque Control Strategy for Induction Motor Based On Fuzzy System

The paper provides a torque control strategy for induction motor drives. The strategy makes use of fuzzy based switching pattern for the converter switches for conversion of the DC to AC. The converter is a conventional...

CFD Analysis on Circular Fins in Light Weighted Automobile Vehicle

The presented paper deals with the design of fins on the cylinder of four stroke single cylinder SI engine. The main objective of design is to provide the maximum cooling which will result in producing highly efficient...

Ruthenium Oxide: Thin Film and Electrochemical Properties

Electrochemical supercapacitors have attracted increased interest due to their high power density and long life cycle compared to batteries and high energy density compared to conventional capacitors. In recent years va...

Download PDF file
  • EP ID EP22775
  • DOI -
  • Views 228
  • Downloads 3

How To Cite

Natrayan L, Prabhu R (2016). Vehicle Compartment Heat Control Using Phase Change Materials. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(11), -. https://europub.co.uk/articles/-A-22775