Velocities and Accelerations at the 3R Mechatronic Systems
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 1
Abstract
Abstract This article presents an original method to determine the speeds and accelerations to structures MP R-3 The structure of the 3R (space) are known (required) rotation speeds of the triggers and must be determined speeds and accelerations of the endeffector M. Starting from the positions of direct kinematic system MP R-3deriving these system of relations in depending on the time, once and then a second time (the second derivation) is first obtains the speeds of the system and for the second time the accelerations endeffector point M. System on which must be resolved has three equations and three independent parameters to determine. Constructive basis is represented by a robot with three degrees of freedom (a robot with three axis of rotation). In the case where a study (analysis) a robot anthropomorphic with three axis of rotation (which represents the main movements, it is absolutely necessary), already has a system of the basis on which it can add other movements (secondary,). All calculations have been arranged and in the form of the array. Copyright © 2017 Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP201355
- DOI 10.3844/ajeassp.2017.252.263
- Views 65
- Downloads 0
Correlation of Biodiversity of Algal Genera with Special Reference to the Waste Water Effluents from Industries
Abstract Pollution is the introduction of contaminants, which cause adverse change, into the natural environment and mainly from external inputs like sewage, waste from industries, oil spills and agricultural use of pes...
The Effect of RSA Exponential Key Growth on the Multi-Core Computational Resource
Abstract Cryptography has been widely used as a mean to secure message communication. A cryptosystem is made up of a publicly available algorithm and a secretly kept key. The algorithm is responsible for transforming th...
Recognition of Faces using Efficient Multiscale Local Binary Pattern and Kernel Discriminant Analysis in Varying Environment
Recognition of Faces using Efficient Multiscale Local Binary Pattern and Kernel Discriminant Analysis in Varying Environment Sujata G. Bhele and V.H. Mankar DOI : 10.3844/ajeassp.2017.726.732 American Journal of Engine...
WLHP Systems in Commercial Buildings: A Case Study Analysis Based on a Dynamic Simulation Approach
Abstract In this study, the results of the performance analysis of a WLHP system applied to a large mall building located close to Naples (South Italy) is presented. The investigation was carried out through a purposely...
Effect of Nano-Alumina on Pore Structure and Durability of Class F Fly Ash Self-Compacting Mortar
Effect of Nano-Alumina on Pore Structure and Durability of Class F Fly Ash Self-Compacting Mortar Ehsan Mohseni and Konstantinos Daniel Tsavdaridis DOI : 10.3844/ajeassp.2016.323.333 American Journal of Engineering and...