Verification of Properties of Joints Made of Advances High Strength Steels in the Conditions of the Complex Thermal Cycles of the HPAW Process
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2018, Vol 62, Issue 5
Abstract
The article discusses the primary issue related to the verification of properties of joints made in AHSS in relation to conventional structural steels and based on the identification of cooling time t8/5. The solution suggested in the study involving the application of the Finite Element Method is based on two computational models. In addition the article presents a material model allowing for properties of single metallic phases and their interaction during the welding cycle. The study also describes the numerical model of the HPAW (plasma + MAG) heat source composed of two models predefined in the Simufact.Welding software programme corresponding to the nature of constituent processes. The research-related tests also involved welding simulations and experimental verification. The tests demonstrated the conformity of simulation results and the high usability of simulation when verifying properties of joints.
Authors and Affiliations
Jerzy Nowacki, Adam Sajek
Keywords
Related Articles
- EP ID EP427232
- DOI 10.17729/ebis.2018.5/19
- Views 37
- Downloads 0
Evaluation of the Effectiveness of High-Density Couplants in Ultrasonic Tests
The article presents the analysis of the effectiveness of acoustic feedback required in ultrasonic contact tests. The analysis included high-density couplants, the use of which aimed to provide the most effective transfe...
The World’s First Road Truss Welded Bridge in the Light of NDTs
December 2018 marks the 90-th anniversary of the construction (1928) of the world’s first road truss welded bridge (put into operation in August 1929). The bridge designed by Professor Stefan Bryła is a truss bridge with...
Quality Assessment of Welded Joints Using TOFD Technique in View of Requirements of Current Standards
The article describes the classification and evaluation of TOFD indications according to PN-EN ISO 10863 and PN-EN ISO 15626 as well as identifies, discusses and illustrates numerous examples of typical problems connecte...
Effect of Preheating on the Structure and Mechanical Properties of Steel S1300QL
The use of advanced structural materials entails the necessity of adapting typical welding processes to special requirements resulting from the limited weldability of new materials, often tied to their complex chemical c...
Laser Beam Welding of 10 mm Thick T-joints Made of TMCP Steel
The article presents research on the laser beam welding of 10 mm thick T-joints made of thermomechanically worked high-strength steel S700MC without using a filler metal. The research-related tests involved making single...