Vibration Analysis and Fault Identifications of Rolling Element Bearings– A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The rolling element bearings are the integral components of the rotor shaft system. The failure of bearing can lead to catastrophic consequences. Toreduce the chances of failure in bearing, researchers have studied the dynamic and transient behavior of the mating bodies for the structural and vibrationanalysis. Various techniques were implemented and enough literature is available for the different conditions. In this review, various bearing rotor frameworks with different loading and fault condition were summarized. Moreover, different methods and techniques have increased the early prediction of the fault. Techniques like F. E. A proves to be promising tools to carry out the systematic dynamic behavior of the rotor-shaft system.
Authors and Affiliations
Navdeep Minhas, Nikhil ,, S. S. Banwait
Keywords
Related Articles
- EP ID EP656900
- DOI 10.24247/ijmperdaug2019117
- Views 56
- Downloads 0
Optimization of Process Parameters of Friction Stir Welding of Aa 6082-T6 Using Grey Based Taguchi Method
Friction stir welding process is a mushy state joining technique and is extensively used for unification of similar and dissimilar metals employed for aerospace, automobile and other fabrication industries. Friction stir...
Improvement of Weldment by Post Weld Heat Treatment of Low Carbon Steel
Low carbon steel is also known as Corten steel. It has a lower level of carbon (0.05% to 0.3%). Low carbon steel is widely used in the constructional industry for building bridges, buildings, and telecommunication towers...
Thermodynamic Analysis For Performance Improvement of Power Plant By Flue Gas Heat Recovery System
This analysis shows that how the performance of a thermal power plant can be improved by utilization of waste exhaust flue gas energy. In a power plant, most of the heat loss is from the high-temperature flue gas leaving...
Improving the Bending Strength of Spur Gear Tooth Through Profile Modification using Cad
Undercutting is one of the major tooth failure criteria, observed basically in 20-degree pressure angle, full depth teeth, having number of teeth less than 17 in case of spur gears. Undercutting removes the root of tooth...
Solar Still Efficiency Augmentation using Cylindrical Sweeping Agitator on the Absorber Plate
Passive solar stills are simple devices which generate potable water by way of desalination of brackish water. However, the main limitation of this device is its poor still efficiency. This paper presents an innovative t...