VISUAL DESIGN TOOL FOR ELECTROSTATIC LELSES
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 0, Vol 5, Issue 2
Abstract
Current research presents a visual-computational tool to design and investigate round electrostatic lenses in sense of analysis procedure. The finite elements methods is adopted to find the electrostatic potential in the lens region. Laplaces equation is first replaced by a certain functional which physically represent the electric energy stored in the electric field. This functional is then minimized at each mesh point with respect to the nearest eight ones. This minimization process is proved to be entirely equivalent to solving Laplaces equation. The requirement that the functional being minimized is then yields a set of nine point equations which inter relate the potentials at adjacent mesh points. Finally this set of equations is solved to find the electrostatic potential at each mesh point in the region of the lens under consideration. The procedure steps mention above are coded to program written in visual basic. Hence an interface tool for analyzing and designing electrostatic lenses has been built up. Designing results proved that the introduced tools has an excellent outputs in comparison with the others written in not visual programming languages. Furthermore it easier for researchers and designer to use such a tool over their counterpart ones.
Authors and Affiliations
Hassan Nouri Al-Obaidi, Ali A. Rashead Al-Azawy
Keywords
Related Articles
- EP ID EP653539
- DOI 10.24297/jap.v5i2.1954
- Views 50
- Downloads 0
Neutron Activation Analysis of Some Building Material
Neutron activation analysis (NAA), based on the comparator method, has the potential to fulfill the requirements of a primary ratio method as defined in 1998 by the Comité Consultatif pour la Quantité de Matière — M...
Assessment of Environment Traffic Noise Pollution in Uvwie Local Government Area of Delta State, Nigeria.
The assessment of environmental traffic noise pollution in Uvwie local government area of Delta State, Nigeria was carried out using a well calibrated portable digital sound level meter (Model CEL-231). The s...
Avoiding the Brain Damage
The pursuit of low losses and low distortion are necessary conditions to improve the signal integrity. As mentioned in [1], it is sometimes said that thereare two types of engineers” those who have signal integrityproble...
Dielectric and Electrical Properties of LaGaO3 Ceramics
LaGaO3 based perovskite oxides doped with Sr and Mg exhibit high ionic conductivity over a wide range of oxygen partial pressure and found to be very stable in reducing, oxidizing, and CO2 atmospheres. In this study...
Metallographic study of Sn-Bi-Sb-In alloy prepared by rapid solidification
Sn70-X at.% -Bi15 at.% -Sb15 at.%- Inx at.% alloy ribbons were produced using melt-spinning technique. The surfaces were characterized with Optical Microscopy. Also, scanning electron microscopy combined with energ...