Visual Tests of Welded Joints Made of Thermoplastics
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 3
Abstract
The article describes visual tests of joints having varied thicknesses, made of thermoplastics and welded using a manual extruder. The research-related tests were performed following the principles specified in PN-EN 13100-1. Welding imperfections detected during the tests and the regulations of the PN-EN 16296 standard were used to identify the quality levels of the test joints.
Authors and Affiliations
Janusz Czuchryj, Sławomir Sikora
Keywords
Related Articles
- EP ID EP269790
- DOI 10.17729/ebis.2017.3/3
- Views 78
- Downloads 0
Nd-YAG Laser Beam-Induced Liquation Cracking in Selected Nickel-Based Superalloys
MAR-M247 and Rene 77 belong to intermetallic phase Ni₃(Al, Ti) precipitation hardened nickel alloys widely used in the aerospace and power engineering industries. Because of their susceptibility to cracking, the above-na...
Evaluation of the Microstructure of 600 and 617 Nickel Alloys Subjected to Arc Welding
The paper presents the results concerning the assessment of the microstructure 600 and 617 nickel alloys. Test alloys delivered as plates were exposed to welding arc applied in the TIG method. The assessment involving th...
Assessment of Macro and Microstructure of Welded Joints Made of Steel P265GH Using Various Combinations of Welding Consumables
The article presents the assessment of the macro and microstructure of welded joints made in steel P265GH using various combinations of filler metal wires and shielding gases. In addition to microstructural analysis, tes...
Laser Beam Welding of 10 mm Thick T-joints Made of TMCP Steel
The article presents research on the laser beam welding of 10 mm thick T-joints made of thermomechanically worked high-strength steel S700MC without using a filler metal. The research-related tests involved making single...
Possibilities of Increasing the Fatigue Strength of Welded Joints in Steel S700MC through High Frequency Impact Treatment (HiFIT)
The article presents today’s possibilities of modifying the fatigue strength of welded joints made in steel S700MC using the high frequency impact treatment (HiFIT). Research-related fatigue tests involved MAG-welded but...