Waste Minimization by Reuse and Recycling
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
Recently, pollution prevention directs attention towards the elimination or reduction of undesired by- products within the production process itself before treatment. On the long term, pollution prevention through waste minimization and cleaner production is more cost-effective and environmentally sound than traditional pollution control methods. The objective of this work was to carry out a feasibility study to define and implement an integrated pollution prevention and control measure in order to minimize waste and therefore to achieve compliance with the Romanian Environmental law.
Authors and Affiliations
Daniela L. NEGOITA, Ion ION
Keywords
Related Articles
- EP ID EP655964
- DOI -
- Views 74
- Downloads 0
Development of Blade Design for Small Hawt Adapted for Lower Values of Wind Speed
The paper aims at studing, theoretically and experimentally, the influence of turbines blade profile on output power, in order to decrease effective domain to smaller wind speed, specific to Galati area. Studies have bee...
Glass- Carbon Bioactive Coatings on a TiO2-Nb2O5 Substrate
The research carried out studies the processes of coating and impregnation of non-active glass carbon coatings on TiO2-Nb2O5 substrates, intended for surgery implants for hip joint prostheses. It was found that the coati...
Chargers for Blast Furnaces Double Bell vs. Rotary Chute
The distribution of materials at the mouth of the loading of a furnace is decisive for its operation at optimal efficiency. For this operation using charging devices that can be of several types is useful. The paper pres...
Fatigue Degradation of Materials as a Tool for Damage Assessment
Damage assessment of components or systems is strongly related to the way components fail. Thus, an appropriate understanding of failure degradation of components is necessary. Furthermore, most of the failures are relat...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...