Water jet cutting waterproof foliated plywood
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Water jet cutting waterproof foliated plywood. This paper focuses on the use of unconventional technologies for water jet cutting beam foliated waterproof plywood material. The following are the results of the experiment measuring surface roughness of cutting edge contact surface roughness and determination of damage to the lower edges of the cut material using indirect detection methods. The results are documented in tables, charts, and photographs.
Authors and Affiliations
MIROSLAV ROUSEK, JAKUB LISEC, ZDENĚK KOPECKÝ, LUĎKA HLÁSKOVÁ
Keywords
Related Articles
- EP ID EP339257
- DOI -
- Views 62
- Downloads 0
Acoustic emission generated from the loaded wood-HDPE composites
Acoustic emission generated from loaded wood-HDPE composites. The objective of the study was to assess the effect of wood particle size on the characteristics of acoustic emission generated from wood-HDPE composites and...
Influence of filling mixtures on the properties of HDF surface
Influence of filling mixtures on the properties of HDF surface. During the production of MDF boards, the mats were coated with a different filling mixtures in aim to reduce the surface roughness and liquid absorption of...
Study of thermal conductivity of polymer composites
Study of thermal conductivity of polymer composites. Electrically and thermally conductive composites made using high density polyethylene (HDPE) matrix blended with a special grade of branch-structured nickel particles...
Standards in design and realisation of timber structures: PN-EN 338, PN-EN 14081-1 and PN-EN 15497
Standards in design and realisation of timber structures: PN-EN 338, PN-EN 14081-1 and PN-EN15497. This paper is to present scope and differences between PN-EN 14081-1 and PN-EN 15497:2014 with special attention on desig...
Imaging of anode biofilm in cellulose-fed microbial fuel cell
Imaging of anode biofilm in cellulose-fed microbial fuel cell. In the present work a possibility of formation of anode biofilm in cellulose-fed microbial fuel cells inoculated with bacteria native to cattle manure has be...