Wear Performance of Ti Based Powders Coating on SS 304 by PVD Method
Journal Title: GRD Journal for Engineering - Year 2016, Vol 1, Issue 0
Abstract
The PVD techniques range over a wide variety of applications from decorative, to high temperature superconducting films. The thickness of the deposits can vary from angstroms to millimeters. A very large number of inorganic materials—metals, alloys, compounds, and mixtures—as well as some organic materials can be deposited using Physical vapour Deposition (PVD) technologies. Traditionally, the term hard coatings refer to the property of high hardness in the mechanical sense with good tribological properties. The analysis of PVD coating on stainless steel has been carried out. The objectives of the coating are to check the properties and wear performance of coated and uncoated materials. For this project, we selected stainless steel discs as a substrate; among those three of them are coated with Ti based powder deposited by using PVD method. While after the coating process has been completed the roughness of each coated and uncoated material has been carried out. Ensure that the weight of the materials should be checked before the wear test is to be performed. Now the wear performance of the coated and uncoated materials should be carried out, in order to achieve the low co-efficient of friction in coated materials than the uncoated materials by using Pin-On-Disc apparatus having Tribological Data Acquisition System. Again the weight of the materials should be checked to determine the weight loss of each material.
Authors and Affiliations
M. Shunmuga Priyan, K. Santhosh, M. A. Sivaraman, S. Subith, M. Sunil
Keywords
Related Articles
- EP ID EP302988
- DOI -
- Views 82
- Downloads 0
Fabrication and Analysis of Waste Heat Recovery System from Automobile Vehicle for Refrigeration Effect
The principle of this project is to recovering waste heat from automobile vehicle and utilizes it for refrigeration affection. The waste heat from engine is recovered by using a copper tube wound around exhaust pipe of e...
Incorporation of Electronic Waste in Industry Concrete as Partial Replacement of Coarse Aggregate
At present demand of infrastructure is increasing day by day. The basic fundamental component for construction of any infrastructure is concrete. Concrete which is widely used in the building materials is popular for its...
Automatic Ream Handling System (Automatic Storage and Retrieval System) by using PLC
Nowadays Automation plays a vital role in industrial applications. This proposal deals with PLCs (Programmable Logic Controller) for automation in material handling. This system is mainly used for storing and retrieving...
Revitalization of Urban Spine - Pan City Proposal for Vadodara
Vadodara has secured its name in the list of 100 Smart cities under the Smart City Mission of Ministry of Urban Development (MoUD), Government of India launched in June 2015. Sustainable and Smart city aims at long term...
A Literature Review of Performance Enhancement And Emission Reduction of a Single Cylinder CI Engine using Tri Fuels
Amidst ever decreasing fuel resources and constantly increasing air pollution, the fundamental sustainability of present energy system has been put into question. The present reserve of Petroleum products is slowly dying...