Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions
Journal Title: Tribology in Industry - Year 2013, Vol 35, Issue 2
Abstract
This paper presents basic tribological properties of A356/10SiC/1Gr hybrid composites in conditions with lubrication. Hybrid composite specimen is obtained by compocasting procedure. A356 aluminium alloy is used as a base matrix alloy, reinforced with 10wt% of SiC and 1wt% of graphite. Tribological tests are done on advanced and computer supported tribometer with block‐on‐disc contact pair. By the experimental plan, test is conducted under three different values of sliding speed, three different values of normal load, different sliding distances, and also different lubricants. SEM and EDS are used for wear analysis. The analysis has shown the presence of MML, which means that there wastransfer of material from steel disc to composite block.
Authors and Affiliations
M. Babić, B. Stojanović, S. Mitrović, I. Bobić, N. Miloradović, M. Pantić, D. Džunić
Keywords
Related Articles
- EP ID EP156714
- DOI -
- Views 72
- Downloads 0
Development of Mobile Device for Oil Analysis
This paper presents the results of project focused on development and practical application of mobile instrument for on-site analysis of industrial oils. For years, the implementation of the oil analysis was limited to a...
The Potential of Magnesium Alloys as Bioabsorbable/ Biodegradable Implants for Biomedical Applications
The potential of magnesium alloys as bioabsorbable / biodegradable implants for biomedical applications has been extensively studied as emerging direction. This paper gives a review of current topics in this field. Resea...
Investigation of Mixture of Vegetable Oil and Synthetic Esters as Environmentally Friendly Base Stock for Low-temperature Lubrication Applications
Environmental issues are of great importance in all the areas of industry and transport. Usage of environmentally friendly, easily biodegradable lubricants has a benefit, when the oil can get into environment by using to...
Investigation of Friction Behaviors of Brake Shoe Materials using Metallic Filler
Some vehicles use brake shoe made from semi-metallic materials. Semi-metallic brake shoes are made from a combination of metallic and non-metallic materials. Metallic particles are added in the formulation of brake shoe...
Erosion-corrosion Behaviour of Dual Phase Medium Carbon Steel using a Designed Slurry Pot
A slurry pot has been designed, fabricated and evaluated for erosion-corrosion investigations. A variable voltage controller was used to vary the input voltage into the one-horse-power motor that controls the slurry pot....