Welding of (Super) Duplex Stainless Steel
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 5
Abstract
The article presents and describes in detail duplex steels used in modern sectors of industry (duplex, super duplex, lean duplex and hyper duplex), with particular attention paid to corrosion resistance and primary areas of application. The article also discusses welding-related issues including the preparation of the base material, welding techniques and procedures, requirements concerning heat input as well as pre-weld and post-weld heat treatment. The article emphasizes the growing use of duplex steels, among other things in welded structures, and forecasts their further development.
Authors and Affiliations
Vincent van der Mee
Keywords
Related Articles
- EP ID EP256845
- DOI 10.17729/ebis.2016.5/6
- Views 71
- Downloads 0
MMA Repair Welding of Nodular Cast Iron GJS 350-22
The article presents results of the MMA repair welding of nodular cast iron GJS 350-22. Casting defects were simulated mechanically (through milling), whereas repair welding was performed using selected filler metals (lo...
Comprehensive Procedure of the Assessment of the Quality of Welded Joints Made in Alloy INCONEL 617
The development of the power engineering industry forces designers and material engineers to develop and implement new technologically advanced materials, including alloy INCONEL 617. There are numerous works concerning...
Properties of welded joints made of cast steel GX8CrNi12-1
The article presents test results concerning welded joints made of cast steel GX8CrNi12-1. The above-named cast steel has a martensitic microstructure and can be used in pressure equipment operated at ambient and high te...
Heat Treatment Effect on the Structure and Properties of Electron Beam Welded Joints Made of High-Alloy Titanium
The article presents the specific formation of a joint made of highstrength high-alloy titanium alloy (α + β) subjected to electron beam welding in vacuum. Tests involved the use of Ti-Al-Mo-V-Nb-Cr-Fe-Zr specimens obtai...
Laser Beam Welding of 10 mm Thick T-joints Made of TMCP Steel
The article presents research on the laser beam welding of 10 mm thick T-joints made of thermomechanically worked high-strength steel S700MC without using a filler metal. The research-related tests involved making single...