Work on the modification of the structure and properties of Ti6Al4V titanium alloy for biomedical applications
Journal Title: Archives of Materials Science and Engineering - Year 2016, Vol 78, Issue 1
Abstract
Authors and Affiliations
J. Klimas, A. Łukaszewicz, M. Szota, K. Laskowski
Keywords
Related Articles
- EP ID EP189818
- DOI 10.5604/18972764.1226308
- Views 77
- Downloads 0
Experimental-numerical test of open section composite columns stability subjected to axial compression
Purpose: The aim of the work was to analyse the critical state of thin-walled composite profiles with top-hat cross section under axial compression. Design/methodology/approach: The purpose of the work was achieved by us...
Comparison of selected properties of surface layer of Ti6Al4V titanium alloy after injection casting with and without suction
Purpose: The paper presents the comparison of selected properties of surface layer between samples produced from Ti6Al4V titanium alloy by using injection casting with two options: injection with suction, in...
System of single-piece flow case hardening for high volume production
Purpose: Purpose of this paper is development of single-piece flow system to precisionthermal treatment of parts of mechanical gear using a short-pulse low-pressure carburisingtechnology (developed for a new large-chambe...
Effect of ageing time on microstructure and mechanical properties of SAF 2205 duplex stainless steel
Purpose: SAF 2205 duplex stainless steels (DSSs) are materials characterized by a favourable combination of the properties of ferritic and austenitic stainless steels. This type of stainless steel presents g...
Copper infiltrated high speed steel skeletons
Purpose: This article is a monographic summary of the most important research results from the last 10 years regarding HSS based materials. This materias were produced with powder metallurgy techn...