ZCu10Sn2ZnFe1.5Co1 SOLUTION TREATMENT PROCESS AND ORGANIZAT IONAL PERFORMANCE RESEARCH
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
The In-situ iron nanoparticle reinforced ZCu10Sn2ZnFe1.5Co1 alloy was fabricated by centrifugal casting in vacuum chamber with a medium frequency electrical furnace. The processes of solid solution of ZCu10Sn2ZnFe1.5Co1 alloy are investigated and the process optimization conditions are confirmed by microstructure observation and the tensile test measures. The results show that proper solid solution can improved the microstructure and the mechanical property. By 700℃×120min solid-solution treatment, brittle δ phase is almost entirely dissolved into the matrix, the tensile strength and the break elongation of ZCuSn10Zn2Fe1.5Co1 reach 485.8 MPa、51.84％ respectively after, increased by 15.74％and 230.62％ than the original alloy
Authors and Affiliations
Ding Ding, DaYong Lu, Xing Wang, DengWei Zhang, Tao Wang, KaiXuan Chen
Keywords
Related Articles
- EP ID EP414799
- DOI 10.26480/icnmim.01.2018.309.311
- Views 70
- Downloads 0
ELECTROCHEMICAL PROPERTIES OF FE-DOPING LI4TI5O12 AS ANODE MATERIAL FOR LITHIUM ION BATTERY
Li4Ti5O12 and Li4-x/3FexTi5-2x/3O12 were synthesized by sol-gel method. Material structure, morphology and electrochemical performance were characterization. The result showed that after doping copper ions, crystal shape...
DESIGN OF THE DISTILLATION TOWER TEMPERATURE CONTROL SYSTEM BASED ON JX-300XP DCS
In combination of the powerful capability of engineering computing of MATLAB and the virtual interface of AdvanTrol-Pro, the serial communication between AdvanTrol-Pro and Matlab is designed and realized by OPC technolog...
GREEN SYNTHESIS OF MCM-49 ZEOLITE USING LOW TOXICITY TEMPLATE
MCM-49 zeolites have been synthesized by dynamic hydrothermal method with piperazine (PIP) as low toxicity template to replace traditional cancerogenic hexamethyleneimine (HMI). The structure and physical-chemical proper...
ZCu10Sn2ZnFe1.5Co1 SOLUTION TREATMENT PROCESS AND ORGANIZAT IONAL PERFORMANCE RESEARCH
The In-situ iron nanoparticle reinforced ZCu10Sn2ZnFe1.5Co1 alloy was fabricated by centrifugal casting in vacuum chamber with a medium frequency electrical furnace. The processes of solid solution of ZCu10Sn2ZnFe1.5Co1...
RESEARCH PROGRESS OF AMINE CATALYSTS FOR POLYURETHANE
Polyurethane products are numerous and widely used in fields, such as foams, elastomers, elastic fibers, coatings, and adhesives, etc. Polyurethane catalyst is an important part of polyurethane. In the production of poly...