Optimization of Different Machining Parameters of En 354 Alloy Steel In CNC Turning Operation Using Taguchi Method
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 6
Abstract
The objective of this experimental study is to develop a single optimization method for lower surface roughness and maximum metal removal rate in terms of process parameters while carrying out CNC turning operation. The machining parameters which are controllable for this operation included spindle speed, feed rate and depth of cut and developed a relationship between them to get minimum surface finish and maximum MRR. Taguchi orthogonal array, S/N ratio and ANOVA were employed to study the performance characteristics in the CNC turning of EN 354 alloy steel using CNMG 120408 GT cutting tool to find out the optimum level which affects the cutting parameters on surface roughness and MRR. Experiments have been conducting using L9 orthogonal array on a STALLION 100 HS CNC turning machine. The MINITAB–17 software was used to analysis the responses. The machining parameters are varied to investigate their effect on output responses. Results of this study indicate that the cutting speed has the most significant factor followed by feed rate on both responses.
Authors and Affiliations
Sanjay Yadav, Sanjay Kajal
Keywords
Related Articles
- EP ID EP20962
- DOI -
- Views 500
- Downloads 20
Power Flow Analysis of Radial Distribution System using Backward/Forward Sweep Method
Power flow analysis is a basic and necessary tool for any electrical system. A standard and efficient power flow technique is required for real-time applications such as switching, optimization of network and so on. The...
slugDesigning a Model for Web Page Generation Using Repository of Templates
Software engineering is the art of Science containing software development life-cycle. It has different models which are used for devolving any type of software with each model having its own life-cycle. Similar to soft...
Presentation Layer Work Based On Cloud
The power of cloud enables dynamic scalability of applications facing various business requirements. The world experiences the Internet through the use of the World Wide Web, e-mail, and file-sharing programs. Most of t...
Substation Automation System for Energy Monitoring and Control using SCADA
Inherent scarcity of thermal sources with a time varying temperature profile is the reason why the Thermo electricbased energy harvesting is not as prominent as its counter-part, thermoelectric generators, in the thermal...
Energy Management of a Hybrid Active Wind Generator
I have studied in this paper properly. The main purpose of this project is that control system is coordinate these two deferent energy sources, and particularly their power exchange and maintain constant power supply in...