Optimization of Different Machining Parameters of En 354 Alloy Steel In CNC Turning Operation Using Taguchi Method
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 6
Abstract
The objective of this experimental study is to develop a single optimization method for lower surface roughness and maximum metal removal rate in terms of process parameters while carrying out CNC turning operation. The machining parameters which are controllable for this operation included spindle speed, feed rate and depth of cut and developed a relationship between them to get minimum surface finish and maximum MRR. Taguchi orthogonal array, S/N ratio and ANOVA were employed to study the performance characteristics in the CNC turning of EN 354 alloy steel using CNMG 120408 GT cutting tool to find out the optimum level which affects the cutting parameters on surface roughness and MRR. Experiments have been conducting using L9 orthogonal array on a STALLION 100 HS CNC turning machine. The MINITAB–17 software was used to analysis the responses. The machining parameters are varied to investigate their effect on output responses. Results of this study indicate that the cutting speed has the most significant factor followed by feed rate on both responses.
Authors and Affiliations
Sanjay Yadav, Sanjay Kajal
Keywords
Related Articles
- EP ID EP20962
- DOI -
- Views 573
- Downloads 20
Steering System of Electric Go-Kart
Manual rack and pinion steering systems are commonly used due to their simplicity in construction and compactness. The main purpose of this paper is to design and Manufacture manual rack and pinion steering system accor...
A Study on the Strength Development of Geopolymer Concrete using GGBS at Ambient Temperature
Today Concrete usage around the globe is second only to water. The demand of concrete is increasing day by day and cement is used for satisfying the need of development of infrastructure facilities. The production of on...
Arduino Based Ultrasonic Radar System using Matlab
Radio detection and ranging, that is, RADAR is a radio wave technique to determine the scope of the object, angle or speed. It is object detection technology. It is used to detect aircraft, ships, spacecraft, missiles,...
Time History Analysis of Structure having Water Tank at the Top of Building Acting as a Tuned Liquid Damper
An earthquake is a natural phenomenon occurring worldwide. Depending upon the intensity, it may cause damage to life and property. Continuous research is carried out to find the different methods that can provide a solu...
Digital Media and Conflict
Traditional mass media have long been used to amplify and extend viewpoints and ideologies, to persuade audiences at home, and to influence opposing sides in conflict. International broadcasting on shortwave radio and,...