金属支撑型固体氧化物燃料电池研究现状与发展
Journal Title: Science Paper Online - Year 2009, Vol 4, Issue 4
Abstract
金属支撑型固体氧化物燃料电池由于柔韧性好、低电阻及便于电堆组装等优点，被认为是固体氧化物燃料电池(SOFC)发展的一个重要方向。从金属支撑型SOFC的发展背景出发，讨论了金属支撑型SOFC的优点，重点阐述了金属支撑型SOFC的发展现状，同时对目前研究较多的Fe-Cr基和Ni基支撑型SOFC进行了介绍，并评述了这2类金属支撑型SOFC的制备方法、存在问题及发展趋势。在此基础上简要介绍了华中科技大学材料成型与模具国家重点实验室研究的有关工作，总结出该实验室镍金属支撑型SOFC制备工艺的优点，并对存在的问题及今后的研究重点进行了分析讨论。
Authors and Affiliations
Yonghong Kong , Bin Hua , Jian Pu
Keywords
Related Articles
- EP ID EP118671
- DOI -
- Views 83
- Downloads 0
两种液体吸湿剂的除湿性能比较
对分别以溴化锂(LiBr)和氯化锂(LiCl)溶液为吸湿剂的除湿器性能进行了测试，得到了2种溶液在除湿工况下的性能数据。并将实验数据分别拟合成了关于进口参数的除湿量经验公式。基于经验公式，分析比较了2种溶液在相同的除湿装置、空气进口参...
Effect of using cooling and lubrication method with <br /> oils on water in cutting<br />
Cooled air，minimum botanic or ester oils and little water are used to form new cutting fluids of oils on water (OoW) by means of combined mist-jet. The paper speaks the cooling and lubrication method of OoW, and compare...
A study on fast sharing and multidimensional expressing of <br /> science paper in internet ages<br />
“Sciencepaper Online” has been set up by the Center for Science and Technology Development Ministry of Education. It has realized rapid publishing paper on network, it has also reduced the long period of publishing paper...
钪对铸态Al-Cu-Mg-Ag-Zr合金组织与性能影响
采用熔炼铸造方法，制备了不同Sc含量的Al-Cu-Mg-Ag-Zr合金。通过金相、扫描电镜、透射电镜、性能测试等实验方法，研究了Sc对铸态Al-5.3Cu-0.8Mg-0.6Ag-0.2Zr（质量分数，%）合金的组织和性能影响。结果表明，添加0.10 %～0.5 % Sc后，在...
Rational polynomial coefficients generation and physical sensor model recovery for high resolution satellite stereo imagery
A physical sensor model of the remote sensing image describes the geometric imaging relation between the image and the ground with interpretable sensor parameters. These parameters are complex and may change for various...