3D-CFD Simulation of Confined Cross-Flow Injection Process Using Single Piston Pump
Journal Title: Engineering, Technology & Applied Science Research - Year 2017, Vol 7, Issue 6
Abstract
Injection process into a confined cross flow is quite important for many applications including chemical engineering and water desalination technology. The aim of this study is to investigate the performance of the injection process into a confined cross-flow of a round pipe using a single piston injection pump. A computational fluid dynamics (CFD) analysis has been carried out to investigate the effect of the locations of the maximum velocity and minimum pressure on the confined cross-flow process. The jet trajectory is analyzed and related to the injection pump shaft angle of rotation during the injection duty cycle by focusing on the maximum instant injection flow of the piston action. Results indicate a low effect of the jet trajectory within the range related to the injection pump operational conditions. Constant cross-flow was used and injection flow is altered to vary the jet to line flow ratio (QR). The maximum jet trajectory exhibits low penetration inside the cross-flow. The results showed three regions of the flow ratio effect zones with different behaviors. Results also showed that getting closer to the injection port causes a significant decrease on the locations of the maximum velocity and minimum pressure.
Authors and Affiliations
M. Elashmawy
Keywords
Related Articles
- EP ID EP155523
- DOI -
- Views 224
- Downloads 0
An Appraisal of Asia-Pacific Cities as Control and Command Centres Embedded in World City Network
Since the globalization trend is proliferating at a staggering rate, world cities have emerged as the most dominant vanguard incorporated into global economy. Control and command function is one of the robust integral pa...
Investigation of the Strength Properties of Palm Kernel Shell Ash Concrete
Many researchers have studied the use of agro-waste ashes as constituents in concrete. These agro-waste ashes are siliceous or aluminosiliceous materials that, in finely divided form and in the presence of moisture, chem...
Random Valued Impulse Noise Removal Using Region Based Detection Approach
Removal of random valued noisy pixel is extremely challenging when the noise density is above 50%. The existing filters are generally not capable of eliminating such noise when density is above 70%. In this paper a regio...
A Single Sided Edge Marking Method for Detecting Pectoral Muscle in Digital Mammograms
In the computer-assisted diagnosis of breast cancer, the removal of pectoral muscle from mammograms is very important. In this study, a new method, called Single-Sided Edge Marking (SSEM) technique, is proposed for the i...
Finite Element Based Response Surface Methodology to Optimize Segmental Tunnel Lining
The main objective of this paper is to optimize the geometrical and engineering characteristics of concrete segments of tunnel lining using Finite Element (FE) based Response Surface Methodology (RSM). Input data for RSM...