A Compact Key-Shaped Antenna Design for Microwave RFID Applications
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 2
Abstract
This paper presents the design and simulation results of a very compact microstrip patch antenna at 2.45/5.8 GHz for Radio Frequency Identification. A good size reduction of 76% compared to a conventional microstrip antenna is achieved. This antenna has a total area of 31X24 mm2 and mounted on an FR4 substrate with dielectric permittivity constant 4.4, thickness of 1.6 mm, loss tangent of 0.025 and has a Microstrip feed Line. The antenna has a low return loss of about -22.35 dB with VSWR of almost 1.16 and a good gain of 2.63 dBi at 2.45 GHz and it has return loss of 43.26 dB, VSWR of 1.01 and gain of 3.74 dBi at 5.8 GHz. The performance of the proposed antenna is analyzed as well as compared with other RFID antennas at ISM band. It is has been studied, numerically analyzed, simulated using the CST and HFSS software.
Authors and Affiliations
Yassine Gmih, Younes El Hachimi, El Mostafa Makroum, Abdelmajid Farchi
Keywords
Related Articles
- EP ID EP387120
- DOI 10.9790/1676-1202035863.
- Views 117
- Downloads 0
Diffusion-thermo and Aligned Magnetic Field Effects on Free Convection on Flow past an Inclined Porous Plate with First Order Chemical Reaction
A theoretical analysis is carried out to study the heat and mass transfer flow of viscous incompressible fluid past an inclined porous plate with the aligned magnetic field and Diffusion-thermo effects. A uniform magneti...
Design and Analysis of Composite Dc-Dc Converter for Electric Vehicle
In a electric vehicle powertrain, a boost dc-dc converter enables reduction of the size of the electric machine and optimization of the battery system. Design of the powertrain boost converter is challenging because the...
Design and Implementation of New Converter Topology for Electrosurgical Units
Electrosurgery is the process in which high frequency current is applied to human body part for the purpose of surgical operations like cutting, dessication, fulguration etc. While performing electrosurgery, output power...
Two-Zone Control of Direct Current Electric Drive
The speed regulation from zero to limit value in direct current electric drives is done by means of increasing armature voltage from zero to nominal value. It is called the speed regulation in first zone. The speed regul...
Theory and Analysis of Three Phase Induction Motor using Written Pole Technology
Three phase induction motors are employed in almost all the industries because of its simple construction and easy operation. Efficiency of the induction motor is affected by its fixed losses and variable losses which ma...