A Comparative Analysis of a Blend of Natural Jute and Glass Fibers with Synthetic Glass FibersComposites as Car Bumper Materials

Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 3

Abstract

Bumper is one of the main parts which are used as protection for passengers from front and rear collision. The aim of this study was to analyze and study the structure and material employed for car bumper by one of the car manufacturers. In this study, the most important variables like material structures,hardness and impact conditions were studied for analysis of the bumper beam in order to improve the crashworthiness during collision.The composite bumper samples of HYBRID Cs, PNFC, and GF-C were produced and their mechanical properties were investigated andcompared. The HYBRID Cs(combination of jute and glass fibers) was found to exhibit superior hardness and impact property associated to the commercial GF-C material.Hence, it is obvious that the natural jute fiber composites can undeniably replace the commercial GF-C for automotive components.

Authors and Affiliations

Olorunnishola A. A. G. , Adubi E. G

Keywords

Related Articles

Strength of CFST at Elevated Temperature

This paper deals the strength behavior of concrete filled steel tubes at elevated temperature. The main purpose of such a research is to figure out the significance of various structural parameters on the strength of CFS...

Behavior of MSE Wall with Strips and Georgics Reinforcement Subjected To Compaction Loadings

This paper focuses on the comparison of the behavior of a panel type MSE wall using the existing geosynthetic strip and steel strip reinforcement with the behavior of a suggested design of panel type MSE wall using wider...

The Priority of the Road Network Development in Anticipating the Disparity of the Regional Development in Palopo City

The regional development often causes a disparity phenomenon. This research aims to analyze the potential of production of natural resources in terms of regional disparity and the availability of road infrastructure netw...

Response of High Rise R.C. Frames with Exponential Dampers Under Seismically Activated Condition

When a structure is subjected to Earthquake, The seismic forces drives the structure into motion. Due to this action a significant amount of energy is induced to the structures. The means by which this energy is dissipat...

Development of Device ( Magneto Gravity Settlers Equipment ) To Absorb The Metal Like Fe, Ni , Cr, And Ni-Chrome, Lead And Its Alloy ,And Solid Contents Available In Air /Water ( An Air /Water Cleaning Strategies In Industries Where Machining Occur

In Industries where the machining occur Fe metal , steel, Ni ,Cr , Ni-chrome, Al and its alloy, Cu and its Alloy , lead and its alloy etc. to achieve the desired shape and size in manufacturing process. After Machine the...

Download PDF file
  • EP ID EP437906
  • DOI 10.9790/1684-1503016771.
  • Views 66
  • Downloads 0

How To Cite

Olorunnishola A. A. G. , Adubi E. G (2018). A Comparative Analysis of a Blend of Natural Jute and Glass Fibers with Synthetic Glass FibersComposites as Car Bumper Materials. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 15(3), 67-71. https://europub.co.uk/articles/-A-437906