A Comprehensive Comparison Study of Empirical Cutting Transport Models in Inclined and Horizontal Wells
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 2
Abstract
In deviated and horizontal drilling, hole-cleaning issues are a common and complex problem. This study explored the effect of various parameters in drilling operations and how they affect the flow rate required for effective cutting transport. Three models, developed following an empirical approach, were employed: Rudi-Shindu’s model, Hopkins’, and Tobenna’s model. Rudi-Shindu’s model needs iteration in the calculation. Firstly, the three models were compared using a sensitivity analysis of drilling parameters affecting cutting transport. The result shows that the models have similar trends but different values for minimum flow velocity. Analysis was conducted to examine the feasibility of using Rudi-Shindu’s, Hopkins’, and Tobenna’s models. The result showed that Hopkins’ model is limited by cutting size and revolution per minute (RPM). The minimum flow rate from Tobenna’s model is affected only by well inclination, drilling fluid weight and drilling fluid rheological property. Meanwhile, Rudi-Shindu’s model is limited by inclinations above 45°. The study showed that the investigated models are not suitable for horizontal wells because they do not include the effect of lateral section.
Authors and Affiliations
Bonar Tua Halomoan Marbun
Keywords
Related Articles
- EP ID EP324023
- DOI 10.5614/j.eng.technol.sci.2017.49.2.9
- Views 112
- Downloads 0
Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery
In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indic...
A Reconstruction Method for Compressed Sampling in Shift-Invariant Spaces
A traditional sampling method is that the signal should be sampled at a rate exceeding twice the highest frequency. This is based on the assumption that the signal occupies the entire bandwidth. In practice, however, man...
Disinfection Performance against Salmonella Typhi in Water by Radio Frequency Inductive Couple Plasma System
The disinfection performance of the radio frequency inductively coupled plasma (RFICP) system against Salmonella Typhi in water was examined using continuous flow experiments. The evaluation was based on disinfection eff...
Cu(II) Ion Adsorption Using Activated Carbon Prepared from Pithecellobium Jiringa (Jengkol) Shells with Ultrasonic Assistance: Isotherm, Kinetic and Thermodynamic Studies
Adsorption of Cu(II) ions from aqueous solution onto activated carbon (AC) prepared from Pithecellobium jiringa shell (PJS) waste was investigated by conducting batch mode adsorption experiments. The activation with ultr...
Cultivation Strategy for Freshwater Macro- and Micro-Algae as Biomass Stock for Lipid Production
In this research, an algae cultivation strategy was studied. Integrating algae cultivation with wastewater treatment is currently seen as one of the most economical ways of producing algae biomass. A combination of an an...