Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 3
Abstract
In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indicates the dominant role of abrasive tool force impact on the ground surface. A decrease, in contrast, evidences a significant softening under the influence of heat source. This research based on nonparametric statistics to predict the effect of wheel characteristics with abrasives 25A, 92A/25A, 34A, 5A, EKE, 5NQ, TGX, 5SG and with graininess 46 (F46), 60 (F60), 80 with different porosities (structure numbers 6-12), and the expected measures of position and dispersion on the micro-hardness of the surface of a high-speed cutting plate (HSCP) made of W9Mo4Co8 steel. It was found that grinding this HSCP by wheels 5NQ46I6VS3, 5SG46K12VXP, 5SG60K12VXP, 5SG46I12VXP, 25AF46M12 V5–PO, 25AF46M12V5–PO3, 25АF46M10V5–PO, 25AF46M10V5–PO3, 25A F46K10V5–PO3, 25AF60M10V5–PO3, 25AF46L10V5–KF35, EKE46K3V, 92A/25AF46L6V20 occurred without surface softening for 50% of the details from the operating batch.
Authors and Affiliations
Yakov Iosifovich Soler, Van Canh Nguyen
Keywords
Related Articles
- EP ID EP324034
- DOI 10.5614/j.eng.technol.sci.2017.49.3.1
- Views 67
- Downloads 0
Diagenetic Screening in Porites Fossil Corals from South Pagai, Kendari, and Banten Bay, Indonesia
Fossil corals are commonly used in paleoclimate studies to get records of climate parameters throughout the Holocene and beyond. Diagenesis is known as an important error source in paleoclimate reconstruction. The aim of...
Liquefaction Potential Analysis Along Coastal Area of Bengkulu Province due to the 2007 Mw 8.6 Bengkulu Earthquake
This paper presents a seismic response analysis study of liquefiable sites along the northern parts of the coastal area of Bengkulu Province that underwent liquefaction phenomena during the strong earthquake (8.6 Mw) on...
Investigation of Electrochemical and Morphological Properties of Mixed Matrix Polysulfone-Silica Anion Exchange Membrane
Mixed matrix anion exchange membranes (AEMs) were synthesized using dry-wet phase inversion. The casting solutions were prepared by dispersing finely ground anion-exchange resin particles in N,N-dimethylacetamide (DMAc)...
Removal of Copper (II) Ions in Aqueous Solutions by Sorption onto Fly Ash
The ability of fly ash to adsorp Cu(II) ions from two different coal combustion systems was studied. Optimum removal was found at pH 5, contact time 30 minutes and 60 minutes for Fly Ash 1 and Fly Ash 2, respectively, an...
The Effect of TiO2 Coating on Pile Penetration Depth in Clay
Pile driving tests were conducted using models of concrete piles with titanium dioxide (TiO2) coating and piles without coating. Pile surfaces coated with TiO2 become superhydrophilic, which enables water molecules in cl...