A Comprehensive Study of Lip Controlled Human Computer Interface using Machine Learning
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 1
Abstract
Human Computer Interface is just a way to connect user to the computer who are unable to interact with computer (physically) as a normal user. These users can have some physical problems or they are physically challenged so that they are not able to interact with computer system i.e. they may be the physical disorder like Tetraplegia. This paper focuses on the use of lower lip used for input device instead of thumb, fingers or even hand. Working with lower lip is just same as that of thumb throughput. This will helps for the future researches to use lower lip to operate on the input devices.
Authors and Affiliations
Amit Kumar, Dr. Naveen Tewari, Dr. Rajeev Kumar
Keywords
Related Articles
- EP ID EP393414
- DOI 10.9790/9622-0801036972.
- Views 89
- Downloads 0
Registration of the Characteristic Curves of Caned Pump
The paper reports investigation fixed speed caned pump Characteristic which includes flow, pressure, power consumed and pump efficiency under condition of atmospheric pressure and temperature in ShuwaikhKuwait. The exper...
Handwriting Identification By Using Neuro Fuzzy Methods Based On Features Extraction
Handwriting recognition system is a system to recognize one's writing through paper. This technology identifies a unique and fixed piece of writing like human handwriting. The character pattern recognition on human handw...
Effect on Mechanical Properties of Concrete by Partial Replacement of Fly Ash and Silica Fume
In the present study the effect of addition of fly ash and silica fume with different proportions in concrete on mechanical properties has been studied. In this study 8 different mixes were prepared, in which mixes of fl...
Comparing the Reliability of Single Frequency Gps Receivers: A Field Study
As GPS units are becoming smaller and less expensive, the use of GPS is becoming more common in land, air and marine navigation and surveying also the GPS has an an expanding number of applications in Commerce and govern...
Methodology for Cutting tool selection system based on STEP_NC. Part 1: Development of tool Management system according to ISO13399 standard
Computer aided process planning (CAPP) systems are considered as an important interface between computer aided design and computer aided manufacturing systems. One of the main objectives of CAPP systems is to assign adeq...