Methodology for Cutting tool selection system based on STEP_NC. Part 1: Development of tool Management system according to ISO13399 standard
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 9
Abstract
Computer aided process planning (CAPP) systems are considered as an important interface between computer aided design and computer aided manufacturing systems. One of the main objectives of CAPP systems is to assign adequate tools to manufacture the part. In fact, selecting the best tool is a critical activity and depends on numerous factors related essentially to the part and tool characteristics, machining conditions, etc. This paper describes a methodology for cutting tool selection based on STEP_NC and using tool definition according to ISO 13399 standard. The main focus was on milling process. A study of influencing parameters was conducted and some concluding remarks were made. The paper emphasizes the importance of the definition of cutting tools according to STEP-NC and ISO13399 standards in data tool exchange and proposes an automated optimized methodology for cutting tool selection. In this paper, a database was developed to ensure management of cutting tool using MySQL SERVER. Data tool were extracted from Sandvik Corormant ISO 13399 product library, by development of a new software using object oriented approach.
Authors and Affiliations
Hanae ZARKTI, Abdelilah EL MESBAHI, Ahmed RECHIA
Keywords
Related Articles
- EP ID EP392431
- DOI 10.9790/9622-0709074652.
- Views 205
- Downloads 0
An Improved Low Power Counter Design with Clock Enable
This paper presents an improved low power design of a 4-bit Johnson Counter which is designed using and Clock enable method. The proposed design shows a power reduction of 5mW as compared to the conventional Johnson coun...
Comparative assessment of landslide susceptibility by logistic regression and first order second moment method: Case study of Bujumbura Peri-Urban Area, Burundi.
Several landslides incidents in the Bujumbura region are reported regularly by independent sources. However, few studies on the causes in the region have been conducted and no record of susceptibility map at a regional e...
Experimentation Of Denial Of Service Attack In Wireless Local Area Infrastructure Network Using Loic Tool
Denial of Service attack (DoS) is a major issue prevailing in wireless local area infrastructure network. It occurs by spoofing Medium Access Control (MAC). In past, a person who skilled in technology only can exploit at...
An Approach of D-STATCOM in Single Phase System with Power Quality Improvement
The paper describes the design of D-STATCOM in single phase for voltage interruption mitigation of fault in an unbalance system. Speed of response is higher than static var compensator (SVC) and harmonic emission is less...
Design And Analysis of A Compact Slotted Patch antenna with Enhanced Bandwidth and Harmonic Suppression for WLAN Applications
A single-layer a compact microstrip-fed Slotted patch antenna with capabilities of both bandwidth enhancement and harmonic suppression is proposed. For this purpose, a pair of λ/4 microstripline resonators is introduced...