A HYBRID METHOD OF DETERMINING DEFORMATIONS OF ENGINEERING STRUCTURES WITH A LASER STATION AND A 3D SCANNER
Journal Title: Civil and Environmental Engineering Reports - Year 2018, Vol 2, Issue 28
Abstract
The article presents the technology and an analysis of results of engineering structure displacements and deformation measurements. Two measuring technologies using the TDRA65000 laser station from Leica and the FARO Focus M scanner were applied during the tests. Use of the laser station enabled us to define horizontal and vertical displacements of a control network established on the tested facility. Owing to this, it was also possible to transform scanner measuring stations into one integrated unit. The described measurement methodology ensures a high accuracy of scanner station fitting which translates directly into the accuracy of determination of deformations in structural components of a facility. Integration of methods applied in the tests makes it possible to monitor not only displacements of control network points but also the structure as a whole in a uniform coordinate system.<br/><br/>
Authors and Affiliations
Jacek SZTUBECKI, Adam BUJARKIEWICZ, Karol DEREJCZYK, Michał PRZYTUŁA
Keywords
Related Articles
- EP ID EP398999
- DOI 10.2478/ceer-2018-0028
- Views 71
- Downloads 0
test
test
BENDING RESISTANCE OF METAL-CONCRETE COMPOSITE BEAMS IN A NATURAL FIRE
In this paper, the bending resistance of three metal-concrete composite beams was compared in real car fires in an open car park. Steel and concrete composite beams are often used for the construction of ceilings in mult...
CULTURAL HERITAGE PROTECTION ISSUES IN LEŚNICA, THE SETTLEMENT OF WROCŁAW
Leśnica, today the settlement on the western edge of Wrocław, formerly was an independent town, located on a previously wooded area, with a linear street system. It developed in the Middle Ages around the castle and chur...
TECHNICAL AND TECHNOLOGICAL ANALYSIS OF INDIVIDUAL WASTEWATER TREATMENT SYSTEMS
The article characterises most frequently selected by investors individual mechanical and biological sewage treatment systems. On the basis of gathered information and technical documentation, technical and technological...
ADSORPTION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) FROM AQUEOUS SOLUTIONS ON DIFFERENT SORBENTS
This paper presents the results of the possibility and effectiveness of PAHs removal from a model aqueous solution, during the sorption on the selected sorbents. Six PAHs (naphthalene, acenaphthylene, acenaphthene, fluor...