A HYDRO-GEOPHYSICAL INVESTIGATION OF GROUNDWATER BY ELECTRICAL PROFILING
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 5, Issue 1
Abstract
Hydro geophysical investigation of groundwater was performed using electrical resistivity method. Wenner configuration of electrode arrangement with vertical electrical sounding (VES) was done with IGIS signal stacking resistivity meter model SSR-MP-ATS. Resistivity survey was conducted to obtain the pattern of aquifer distribution in the area and to delineate possible sites for locating aquifers. An estimate of the resistivity and thickness of various subsurface layers at a location could be obtained by successively increasing electrode spacing. The inverse of the resistance measured 1/R was plotted against Wenner electrode separation on a linear graph to detect thin layers at deeper layers in the eight locations under consideration. Analysis of 2 -D cross-section of strip resistivity was done to identify site favourable for recharge structure.
Authors and Affiliations
Kurien E. K
Keywords
Related Articles
- EP ID EP138379
- DOI -
- Views 61
- Downloads 0
Design and Implementation of BISR for 3d Multiple SRAMS with Redundancies in a SOC
Embedded memories contain several hundreds of memory cores which constitute a significant portion of the chip area for typical system-on-chip (SOC) designs. With the shrinking transistor size and aggressive design...
ANALYSIS OF EFFECT OF PRIMER COAT ON SOLID INK DENSITY OF METALIZED SHEETS PRINTED WITH DRY TONER BASED DIGITAL PRINTING
The purpose of this analysis is to determine the relationship between primer coat and the solid ink density by printing the primer coated metalized board and non primer coated metalized board with a dry toner based...
Talent Management” in Retaining Talents for Organizational Natural Competitive
Talent Management is the capability to create and continuously optimize the talent resources needed to execute a business strategy. In the light of strategic goals, finding new sources of value in employee’s perfo...
DESIGN AND MODELLING HILBERT TRANSFORM BASED PHASE DETECTOR FOR ALL DIGITAL PHASE LOCKED LOOP
The Phase Locked Loop (PLL) is an almost always used electronics circuit for communication systems like modulator, demodulator, frequency generator and frequency synthesizer etc. All-digital phase locked loop (ADP...
Study on ZIGBEE Technology
ZIGBEE is one of the most widely used transceiver standard in wireless sensor networks. Zigbee over IEEE 802.15.4., defines specifications for low rate WPAN(LR-WPAN) to support lower monitoring and controlling devices....