A Novel Neutral Point Clamped Full-Bridge Topology for Transformerless Photovoltaic Grid-Connected Inverters
Journal Title: Engineering, Technology & Applied Science Research - Year 2017, Vol 7, Issue 2
Abstract
This paper presents a novel neutral point clamped full-bridge topology for transformerless photovoltaic grid-tied inverters. Transformerless grid-connected inverters have been used widely in recent years since they offer higher efficiency and lower costs. Ground leakage current suppression is the main issue which should be considered carefully in transformerless photovoltaic grid-connected inverters. Among different methods used to decline ground leakage current, neutral point clamped (NPC) topologies are considered more useful and effective. In NPC topologies, the short-circuited output voltage at the freewheeling period is clamped to the middle of the DC bus voltage. Therefore, the common-mode voltage (CM) will be constant at the whole switching period. Various NPC topologies such as H6 [1], HB-ZVR [2], oH5 [3], and PN-NPC [4] have been proposed. In this paper, a novel NPC topology is proposed which has lower power losses and higher efficiency over previous topologies. Furthermore, the proposed NPC topology exhibits a similar ground leakage current with the PN-NPC topology. The proposed NPC topology is analyzed theoretically using simulation studies and an experimental prototype is provided to verify theoretical analysis and simulation studies.
Authors and Affiliations
M. Pakdel, S. Jalilzadeh
Effect of Social Capital on Innovation: A Mediating Role of Employee Motivation
Enterprises’ survival depends on their ability to self-reconstruct. This reconstruction regards coordinated goals with the current situation and improved methods used to achieve these goals. Companies have to improve pro...
Numerical Investigation of the Physical Properties Effect on the Thermal Performance of a Vertical Geothermal Heat Exchanger
Low-temperature geothermal energy is a promising technique for heating and cooling residential and commercial premises, especially since it is one of the green energy solutions that respect the environment. The principle...
Simulation of a Steel Wire Straightening Taking into Account Nonlinear Hardening of Material
Straightening is used to ensure the straightness of a rod workpiece as well as to redistribute or reduce the residual stresses in a finished product. The accuracy of modeling the operation of this kind plays an important...
Microscopical Characterization of Cast Hypereutectic Al-Si Alloys Reinforced with Graphene Nanosheets
This paper illustrates the effects of stirring and graphene nanosheet (GNS) addition on the microstructure and mechanical behaviour of 393 hypereutectic Al-Si alloys used in the diesel engine pistons. Two processing rout...
Rectangular Strain-Rosette Method for Measuring the Mode I Stress-Intensity Factor KI and T-stress
In this paper, a new experimental technique for measuring Stress Intensity Factor (SIF) and T-stress under mode I loading is developed. The expressions of the normal and tangential strains close to the crack tip are give...