A Novel Visual SISO and MIMO Computer Interface for Process Production System
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Computer based automation systems have found a wide range of applications in manufacturing and processing industries. To interface computer and control system, various standard industrial interfaces were used. Because of its complexity and high cost in some places, a custom model was built by a person having broad knowledge of computer and control system. Later on visual patterns based computer interfacing was introduced. This used less hardware when compared to the standard model. To further reduce its hardware complexity, in this paper, a modified vision based computer interfacing is introduced for single input single output (SISO) systems. This technique is further extended for multiple inputs and multiple output systems (MIMO). The working of the proposed interface modules were tested with the help of computer control based SISO conical liquid tank system and MIMO heat exchanger system
Authors and Affiliations
MANIKANDAN C, NEELAMEGAM P, RAKESH KUMAR S, SAI SIVA SATWIK. K
Keywords
Related Articles
- EP ID EP347161
- DOI 10.24247/ijmperdapr201820
- Views 60
- Downloads 0
Operational and Design Parameters of Unified Vehicles
The purpose of the article is to summarize and analyze the problems of design and operation of heavy trucks and semi-trailers in difficult road conditions and on terrains, subject to severe wetting. The state of knowledg...
The Optimization Techniques used in Solar Dryers: A Review
The energy from the sun is the most important source comprising renewable energy available on earth. The utilization of solar radiation for fruitful results are done in almost all the sectors such as industries, automobi...
The CFD Analysis of Subsonic Flow Around Struts of Airfoil and Cylindrical Shape Attached to a Conical Diffuser at Exhaust of a Gas Turbine Engine
After burners are employed in an aero engine of a fighter aircrafts, to achieve maximum thrust during takeoff, climb and during some special combat maneuvers. Since the fuel consumption is high during the afterburning op...
Design and Analysis of Steam Turbine Blade
Steam turbine changes over the warmth vitality of steam into helpful work. Steam planes strike the moving columns of sharp edges mounted on rotor causes alter the course of steam which grants energy. In this manner, tape...
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...