Operational and Design Parameters of Unified Vehicles
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
The purpose of the article is to summarize and analyze the problems of design and operation of heavy trucks and semi-trailers in difficult road conditions and on terrains, subject to severe wetting. The state of knowledge of the issue, possible solutions and normative base are considered for a more detailed solution. Operation provides the vehicle with high performance that will allow it to work in the most difficult road conditions i.e. on reconnaissance areas. However, if the main work of the unit is carried out on the roads, and it is necessary to go to the area only in the event of some unforeseen circumstances, then the traction and speed characteristics close to (or even coinciding) the characteristics of road units should be considered reasonable
Authors and Affiliations
Aleksey G. Amosov, Vladislav A. Golikov, Mikhail V. Kapitonov, Ekaterina V. Mikhailova, Ekaterina Yu. Churakova
Keywords
Related Articles
- EP ID EP614322
- DOI 10.24247/ijmperdjun201946
- Views 103
- Downloads 0
Biodiesel Production from Fish Waste and Characterizing the Properties
Because of the increase in the energy demand in the global world, there is a need to find another source to fossil fuels. Biodiesel is one of the substitute resource since it is biodegradable in nature and causes less po...
OPTIMIZATION OF PARAMETRES FOR WELDABILITY STRENGTH – AN EXPERIMENTAL DESIGN APPROACH
It is necessary to study the input parameters of welded product, to gain a ‘welded joint’ with good quality. The influence of welding parameters such as welding current, welding voltage and welding speed will show a s...
A Customized Wavelet-Based Hierarchical A Posteriori Error Indicator for Linear and Nonlinear PDES
This paper presents an adaptive method that can be used to improve the finite element solution of a linear or non-linear PDE by indicating the local as well as global errors. This wavelet-based adaptation is based on hie...
Tool Wear Monitoring using NNge Algorithm
Cutting tools are required to do the necessary machining operations in the manufacturing Industry. Continuous machining operation causes the tool to degrade. The machining operation done using a worn-out tool will have a...
Experimental Investigation of Heat Transfer Characteristics of the Heat Pipe
The rapid development of electronic industries and increasing processing speed of components, decrease the heat transfer surface area. This generates terribly high heat fluxes, leading to massive temperature rises. To re...