OPTIMIZATION OF PARAMETRES FOR WELDABILITY STRENGTH – AN EXPERIMENTAL DESIGN APPROACH
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
It is necessary to study the input parameters of welded product, to gain a ‘welded joint’ with good quality. The influence of welding parameters such as welding current, welding voltage and welding speed will show a significance effect on a welded joint. By using design of experiment method, the parameters can be optimized and made to have the best parameter combination for target quality. An orthogonal array, Signal to Noise(S/N) ratio have been employed to study the welding characteristics of material and optimize the welding parameter. The result has been computed using the form of contribution from each parameter, through which optimal parameters are identified for maximum tensile strength. The chosen parameters and obtained tensile strength results are analysed by using Minitab software, the calculations are done, results are generated and optimum results are obtained.
Authors and Affiliations
LABESH KUMAR C, VANAJA T, MAHENDER REDDY M
Keywords
Related Articles
- EP ID EP430443
- DOI 10.24247/ijmperdoct201827
- Views 74
- Downloads 0
Experimental Investigation on Properties of Surface Radiation of Solar Collector Receiver Tube Material with Black Nickel Coating
In this study, the characteristics of surface radiation heat transfer properties of stainless steel 304with Black Nickel coating is investigated with and without exposure of sunlight to measure the emissivity (€) and abs...
Effect of Polyacrylamide with ZnO Nano Aqueous Solution on the Chemical Flooding Method with Enhanced Oil Recovery EOR) – An Experimental and Modelling Study
This work studied the effect of polyacrylamide (PAM) with ZnO nanoparticles (NPs) solution on the recovery of crude oil in tertiary stage. Shear viscosity due to shear rate and salt concentration, also shear stress with...
Experimental Investigation on Mechanical Properties of AISI 316l SS Weldment by Using GTAW Process
Welding is considered as one of the most important methods of metal joining process among other joing process. In this study, GTAW and Pulsed GTAW process is are used to weld AISI 316L type of Austenitic steel(3)along w...
A REVIEW ON NATURAL FIBER HYBRID COMPOSITES
In modern industries, the majority of the conventional materials have been replaced by Natural fiber composites due to its high strength to weight ratio, biodegradable, eco-friendly environment, etc. Moreover, natural fi...
A Comparative Study on Microstructure and Mechanical Properties of A356-B4c and A356-Graphite Composites
This work investigated the influence of boron carbide and graphite on the microstructure and mechanical behavior of A356-B4C and A356-Graphite composites. The investigation reveals the effectiveness of incorporation of B...