A REVIEW OF CONTROL METHODS OF WIND TURBINE SYSTEMS WITH PERMANENT MAGNET SYNCHRONOUS GENERATOR
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2017, Vol 7, Issue 4
Abstract
The paper presents a review of control methods of the wind energy conversion systems with permanent magnet synchronous generator. The modern vector control methods for converter system of variable-speed wind energy conversion have been described. In order to improve the energy efficiency of wind turbine, the maximum power point tracking algorithm has been applied. To verify the effectiveness of the considered configuration and its control strategy, the selected simulation studies have been performed. The obtained study results showed the high effectiveness of the considered configuration and its control methods.
Authors and Affiliations
Piotr Gajewski
Fire Temperature Effect on Value of Input Voltage Powering Electrical Equipment and the Effectiveness of Safety Protection of Equipment Required
Fire safety is one of the most important requirements for modern buildings. It is associated with a number of technical requirements to be met at the design stage. Because the most important part of rescue operations is...
DEVELOPMENT OF THE REMOTE-PILOTED VEHICLE ALGORITHMIC SUPPORT AND ON-BOARD NAVIGATION COMPLEX STRUCTURE
The article dwells upon the peculiarities of remote piloted vehicles of on-board navigation complex. It is highlighted that total number of the remote-piloted vehicles have increased and as a result the question of their...
ANALIZA I WERYFIKACJA PARAMETRÓW TERMICZNYCH UKŁADU SCALONEGO
Artykuł opisuje model termiczny układu ASIC zaprojektowanego i sfabrykowanego w technologii CMOS 0,7 m (5 V). Układ scalony składa się z analogowych i cyfrowych źródeł ciepła oraz czujników temperatury a został zaprojek...
ULEPSZONA METODA IDENTYFIKACJI RODZAJU RUCHU WYKORZYSTUJĄCA SENSORY URZĄDZENIA MOBILNEGO
Artykuł przedstawia zastosowanie sensorów urządzeń mobilnych – bardziej rozbudowaną wersję autorskiej metody identyfikacji rodzaju ruchu. Metoda ta została zaproponowana we wcześniejszej pracy. Krótko omówione zosta...
OPTYMALIZACJA OBLICZEŃ TRÓJWYMIAROWYCH LOKALNYCH MAP KIERUNKOWYCH Z UŻYCIEM ŚRODOWISKA OBLICZENIOWEGO MATLAB
W artykule przedstawiono rozwój i ocenę nowego podejścia dotyczącego optymalizacji obliczeń 3D lokalnych orientacji map w środowiska Matlab. Zastosowano dwie różne metody wyznaczania wektora własnego największej wartości...