A Review on Acoustical Properties Measurement Methods and A Proposed Novel Method for Acoustical Characterization of Laminated Glass used in Automotive Applications
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
Many-a-time, deviation of attention of driver due to excessive noise is among the major factors responsible for accidents, and 54.3 dB of the sound between 500 to 5000 Hz is the high noise transmitted to the driver among all the components of the car [1]. Thus, there is a strong requirement for inclusion of acoustical measures for the laminated glass (LG) in IS 2553. The present work includes, a brief review on literature reported on acoustical properties measurement using traditional ASTM E1050-98 (sound absorption testing using impedance tube) and ASTM C423 (sound absorption testing using scale rooms) and acoustical measurements that are reported in literature for biological and other applications. A novel method is also proposed for the acoustical property measurement. The Finite element (FE) simulation for the acoustical property measurement of polyvinyl butyric (PVB) LG (material used for windshield) sample is also performed based on the proposed experimental method.
Authors and Affiliations
Sudhanshu Krishna Sharma, Ajitanshu Vedrtnam, Saurav Kumar
Synthesis Characterization and Mechanical Behavior of Rice Husk Ash Reinforced Al-20mg 10 Cu Alloy Matrix Hybrid Composites
The aim of this work is to fabricate hybrid composites by using Rice husk ash (RHA), an agro waste as reinforcement to AL-20MG-10CU high strength alloy. Rice husk ash particles of 3, 6, 9 & 12 % by weight were used, to d...
Optimization of Design and Operating Parameters for Enhancing the Performances of PEMFC with Serpentine Flow Fields
The performance of the Proton Exchange Membrane Fuel Cell (PEMFC) depends on various design and operating parameters. The present work is aimed to optimize the performance of 25cm2 PEMFC, with respect to one design param...
Design Aand Analysis Oof Process Parameters Oon Multistage Wire Drawing Process- A Review
This paper presents the brief review on process parameters of wire drawing for aluminium 1080A. The aim is to analyse and numerically study the process parameters using finite element model and also to investigate the ef...
EXPERIMENTAL INVESTIGATION ON INFLUENCE OF FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBES ON SURFACE ROUGHNESS IN DRILLING OF CFRP COMPOSITES
This paper presents the effect of carboxyl functionalised multi-walled carbon nanotubes on the surface roughness of drilled holes in carbon fibre reinforced plastic (CFRP) laminates. Drilling tests were conducted on CFRP...
Test Section Blockage Corrections for Subsonic Open-Circuit Wind Tunnel
By their very nature, even the most perfect wind tunnels cannot produce an unconstrained flow past a model. The problem of blockage in the test section has been of concern to experimentalists and theoreticians in the stu...