An Optimization of High Pressure and Temperature of SYNGAS in Underground Coal Mines by using CFD Analysis of Membrane Serpentine Tube
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
The membrane serpentine tube heat exchanger is very useful for various applications such as aerospace, automobile, gas turbine power plants, chemical reactors and other industries, etc. This research deals with the thermal analysis of heat transfer for flowing fluid through tubes using ANSYS FLUENT R18.0. This membrane serpentine tube heat exchanger arrangement can provide aids a large transfer heat area in a small space with coefficients of heat transfer is high. For the construction of membrane serpentine tube heat exchanger, copper is choosing. Syngas is flowing through the conduit and also at the outer shell of the winding tube heat exchanger. In this precise research, an effort is made to evaluate the effect of Optimization of High Pressure and Temperature of Syngas in Underground Coal mines from a membrane serpentine tube heat exchanger, where the cold fluid flows on the tube and the Syngas flowing in the cell of the membrane serpentine tube heat exchanger.
Authors and Affiliations
Sagar S. Gaddamwar, Anand N. Pawar, Pramod A. Naik
Keywords
Related Articles
- EP ID EP464122
- DOI 10.24247/ijmperdfeb201960
- Views 61
- Downloads 0
COMPARISION OF LIFITING RE-ENTRY AND BALLISITC RE-ENTRY
This paper highlights comparison of lifting re-entry and ballistic re-entry. 3-D. O. F code is developed and used for comparing the different re-entries. The main objective of this paper is to minimize deceleration on re...
Numerical Investigation of the Drop Formation Mechanism and Study of the Droplet’s Pressure Contour
The current study provides the numerical investigation of the drop formation mechanism. Volume of fluid methods is used for the numerical simulation. The analysis contains 2% Polyacrylamide as the main fluid that dispers...
THE MULTI-RESPONSE OPTIMIZATION OF MACHINING PARAMETERS IN THE ULTRASONIC ASSISTED DEEP-HOLE DRILLING USING GREY-BASED TAGUCHI METHOD
This paper presents a practical approach for the multiple response optimizations of operational parameters in the ultrasonic assisted drilling of deep holes. Applying the Taguchi design of experiments, a plan of 27 drill...
Studies on Mild Steel Particulates Reinforced Duralumin Composite Fabricated Through Powder Metallurgy Route
In the present study Duralumin(DA) based Mild Steel particles (MSp-6% wt. and 12% wt.) reinforced composite are fabricated by cold compacting the milled powders. The mechanically mixed powders are compacted in a die cavi...
Usage of the Modified Variational Iteration Technique for Solving Fredholm Integro-Differential Equations
In this paper, we present a modified variational iteration method for solving Fredholm integro-differential equations. This study provides an analytical approximation to determine the behavior of the solution. Moreover,...