A Review on Influence of Varying Process Parameters on Plasma Arc Cutting Process
Journal Title: JOURNAL OF ADVANCED RESEARCH IN PRODUCTION AND INDUSTRIAL ENGINEERING - Year 2017, Vol 4, Issue 3
Abstract
Now days, Plasma Arc Cutting (PAC) is becoming one of the best Non Traditional method for performing number of complex operations upto a high extent of accuracy and productivity. In order to maintain this high level of productivity process parameters plays a vital role. In this paper, we are reviewing the research done by different researchers on different process parameters of Plasma Arc Cutting (PAC), which actually concludes the influence of different process parameters on the Material Removal Rate (MRR) using different materials.
Authors and Affiliations
Deepak Bhandari,
Keywords
Related Articles
- EP ID EP272836
- DOI -
- Views 122
- Downloads 0
Performance Evaluation of a Furnace Using Flame Directly Impinging on a Surface - A Case Study of Forging Industry
A modified design of radiation furnace has been presented in which material is heated by flame directly impinging on it. In the existing furnace, the flame produced with gas fired burner (LPG/air) has been used to heat t...
Effect of Tool Pin Profiles on the Tensile Strength of Friction Stir Welded AA6082-T6 Similar Joints
In this investigation, an attempt has been made to analyze the Tensile strength of similar joints Friction Stir Welded AA 6082 alloy plates under different tool pin geometries. The tool pin geometries used in this invest...
Optimal Selection Process Parameters of Ultrasonic Machining of Tool Stepped Horn Modelling Using FEM Analysis
The objective of this study is to investigate the von- mises stresses and total mechanical stress induced in ultrasonic machining tool. Generally, the sonotrodes are made up of metals which have very low acoustic losses...
Investigations for Statistically Controlled Tool Wear Solution of Titanium Alloys Using Ultrasonic Machining
The purpose of present work is to study process capability of ultrasonic machining (USM). Relationships between tool wear rate (TWR) and other controllable machining parameters (like: power rating; tool type; slurry conc...
Investigation of Work-Related Health and Safety Practices in Sports Goods Manufacturing Industries
Work-related health and safety practices are fundamental characteristics for the well-being and benefit of any industrial worker. The main purpose of this study was to find out the existing condition of health and safety...