A Review on MQL in Green Environments Used For Machining Process
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 10
Abstract
It is realized that these fluids are a serious damage to the environment and to the health of the operator working with it. Many alternatives were developed to minimize the quantity of cutting fluid used. The purpose of this article is to review the relevant literature in machining using minimum quantity lubrication In green environments this research project an on-going comparative study will be made for tool wear and surface roughness by varying cutting parameters under flood , air , dry and Minimum Quantity Lubrication (MQL) green environment while machining different materials like high speed steel ,medium carbon steel etc with . The results application of MQL technique will significantly helps to obtain better performance in compare to dry air and flood condition. It is mainly focused on investigating various aspect of machining process from an environmental perspective.
Authors and Affiliations
Madhuri B. Kadu, Dr. U. V. Hambire
Keywords
Related Articles
- EP ID EP392545
- DOI 10.9790/9622-0710032326.
- Views 91
- Downloads 0
A New Method of Reference Signal Generation Applied To UPQC-PHEV For Grid Integration of WECS-SCIG
In this paper a new reference signal generation control technique is proposed for integration of Unified Power Quality Conditioner (UPQC) with Plug-in Hybrid Electric Vehicle (PHEV) for overcoming voltage sag and other v...
Heat and Mass Transfer by MHD Power Law Fluid past a Porous Flat Plate with Heat generation, Chemical reaction and Diffusionthermo effects.
In this investigation, the steady laminar boundary layer flow of a non-Newtonian power law fluid past a porous flat plate is considered. The Chemical reaction and diffusion-thermo effects along with heat generation have...
A Comparative Study of Kinetics of Oxidation of Some acetophenones by Hexacyanoferrate [III] in alkaline medium.
In this study the kinetics of oxidation of o- hydroxyacetophenone, p- hydroxyacetophenone & mhydroxyacetophenone, p-methoxy acetophenone and p-bromo acetophenone by hexacyanoferrate (III) has been studied in alkaline med...
Characterization of Reference Electrode Ag/AgCl Dry Type by Cyclic Voltammetry
In the present work the characterisazion of reference electrode Ag/AgCl type dry by 0.01 M [Fe(CN)6]3-/4- in 0.1 M KCl using the technique of cyclic voltammetry at potential range of -0.2 to 0.8 V and scan rate variation...
Advantages of Concrete Mixing with Tyre Rubber
Strong waste administration is one of the major natural concerns everywhere throughout the world. Tire-rubber particles made out of tire chips, piece elastic, and a mix of tire chips and scrap elastic, where utilized to...