A Review on Self Compacting Concrete with Cementitious Materials and Fibers
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 3
Abstract
Self-compacted concrete (SCC) is cast in the formwork without compaction and it fulfills the formwork due to its own weight. SCC is considered to have many advantages in comparison with conventional concrete like improved construction quality, faster construction activity, reduced cost etc. SCC is produced with the same ingredients of normal concrete. However, cementitious materials are also adopted to replace the cement content in SCC in order to use waste materials from industries and agricultural products. To further enhance the performance of SCC, different types of fibers are tried in order to produce fiber reinforced SCC. The fibers in the concrete bridge the cracks and diffuse the crack propagation which improves mechanical properties. In developed countries SCC has reasonable acceptance in construction industry but in developing countries like Pakistan has not gained acceptance. This paper is focused on undertaking a review of SCC with cement replacement and fiber reinforcement materials. The main objective of this paper is to compile the literature in order to understand the various properties of SCC in fresh and hardened state when these cement replacement materials and fibers are used.
Authors and Affiliations
N. A. Memon, M. A. Memon, N. A. Lakho, F. A. Memon, M. A. Keerio, A. N. Memon
Keywords
Related Articles
- EP ID EP168805
- DOI -
- Views 269
- Downloads 0
Interaction of Rupture Zones of Adjacent Anchor Plates in an Analogical Medium
In this paper, an experimental study which required the design and implementation of a model containing plastic granules powder to simulate a natural environment, is presented. The latter is subjected to the removal of "...
Effect of Shear Flow on Crystallization of Sydiotactic Polypropylene/Clay Composites
The high sensitivity of crystallization to shear flow is a subject of great research interest the last several years. A set of syndiotactic polypropylene/clay composite samples were used to examine the effect of shear fl...
Maximum Power Tracking System Based on Power Electronic Topology for Wind Energy Conversion System Applications
Wind energy has emerged as a dominant alternative power generation source. Conventional energy resources are depleting and their increasing cost cannot be ignored. Wind energy has taken an important role in replacing fos...
Geotechnical Properties of Rubber Tires and Sediments Mixtures
An experimental work was undertaken to study the effect of rubber tires on the geotechnical properties of a dredged sediment, using a mixing ratio of large size. For comparison, two types of soil were studied (dredged se...
Performance Evaluation of Traveling Wave Fault Locator for a 220kV Hoa Khanh-Thanh My Transmission Line
This paper presents the traveling wave based fault location methods of SEL-400L, and SFL-2000 available on the market for a 66.9km, 220kV Hoa Khanh-Thanh My transmission line in Central Viet Nam, such as single-ended, an...