A Study Effect of Sistan Region Dust on the Aero-dynamic Performance of Wind Turbine Blade
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2015, Vol 22, Issue 2
Abstract
It is very important to establish a wind farm in the windy areas due to the increased use of renewable energies. Sistan region is one of the windy regions in Iran but due to the dust in the wind of this area and adhesion property of this particles to the wind turbine blade, smoothness of the blade surface is somewhat lost which affects its aerodynamic performance. In this paper, the aerodynamic performance of wind turbine blade was numerically investigated considering the roughness height due to the sticking dust particles in the wind, change of the attack angle, and roughness height. It compared with the experimental results and the range of the optimum attack angle was proposed for turbine in the Sistan region.
Authors and Affiliations
Mohadeseh Miri, Navid Bozorgan, Farhad Vahidinia
Keywords
Related Articles
- EP ID EP449137
- DOI -
- Views 45
- Downloads 0
A Review of Dynamic Models Used in Simulation of Gear Transmissions
The investigation of relevant scientific literature regarding gear modeling enabled us to discover a significant number of papers dating back several decades and continuing to the present. The purpose of the dynamic mode...
Study of the Magnetic Field of a Permanent Magnet Synchronous Generator by using the Finite Element Method
The study shows the numerical simulation of the magnetic field for a permanent magnet synchronous generator prototype. Through the study, the OPERA software environment, a program based on the numerical computation using...
Special Pattern of Hydraulic Dissipation System used for Isolation of Bridges against Earthquakes
The construction sector experienced a constant evolution over time, so that today structures can be made to withstand earthquakes of considerable magnitude. This can be achieved by using various methods to counteract the...
Improving Filter Performances for Conducted Electromagnetic Interferences Suppression
Improving the performances of a filter for conductive electromagnetic interferences suppression involves two major directions of action: the first direction refers to the increase of attenuation at high frequency, while...
Pre-processing of Images as a Source of Additional Information for Image of the Natural Polymer Composites
Image processing is one of the methods of analyzing and obtaining new information. Image processing methods can be applied to any im-age. Image processing is used in various fields of research. Among the stages of image...