A STUDY OF ACTIVE VIBRATIONS DAMPING WITH THE APPLICATION OF ACTIVE TOOL
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
The article represents a short overview of solutions available on the market, which allow for vibrations damping during the machining process. The description also provides information on the essence of chatter vibrations. The next part of the following paper includes the model of active machine tool based on piezoelectric actuator with work piece and the model of machining process. Next, the results of simulation research are presented for two control systems. All simulations were carried out in Matlab Simulink Software.
Authors and Affiliations
Arkadiusz Parus, Mateusz Kasprowiak
Microstructure, phase composition and corrosion resistance of Ni2O3 coatings produced using laser alloying method
The paper presents the studies' results of microstructure, microhardness, cohesion, phase composition and the corrosion resistance analysis of C45 steel after laser alloying with nickel oxide (Ni2O3). The aim of the lase...
Testing of beveled crimp connections made on a prototype stand
The purpose of this study is to form and test inseparable tight joints, commonly used in the construction of heat exchangers, by crimping operation on designed prototype stand. Crimped joints are made by tools in form of...
The influence of geometric imperfections on the stability of threelayer beams with foam core
The main objective of this work is the numerical analysis (FE analysis) of stability of three-layer beams with metal foam core (alumina foam core). The beams were subjected to pure bending. The analysis of the local buck...
Diagnostic methods of detecting defects within the material with the use of active infrared thermovision
Article presents the methods of detecting defects within material with the use of active infrared thermovision. During the study ABS and PVC samples were used inside which internal structure defects and defects of glue c...
Diagnosis of edge condition based on force measurement during milling of composites
The present paper presents comparative results of the forecasting of a cutting tool wear with the application of different methods of diagnostic deduction based on the measurement of cutting force components. The researc...