Diagnostic methods of detecting defects within the material with the use of active infrared thermovision
Journal Title: Archives of Mechanical Technology and Materials - Year 2017, Vol 37, Issue
Abstract
Article presents the methods of detecting defects within material with the use of active infrared thermovision. During the study ABS and PVC samples were used inside which internal structure defects and defects of glue conjunction between components were modeled. During combining composite materials with the use of glue joints, there is a problem with homogenous distribution of the glue layer on the surface of an element, which results in the creation of defects in joint structure and the decline of active surface of adhesion forces on the combined materials. It is then necessary to control the quality of the conjunction between the glued surfaces. The use of non-contact diagnostic methods allows to analyze a larger surface which conditions in more efficient quality control process. In the study, external heat excitation was used – optical excitation with periodic variable signal (LockIn method) and unit step excitation (Pulse method). The methods of analysis of the obtained thermograms are presented.
Authors and Affiliations
Karol Grochalski, Katarzyna Peta
Keywords
Related Articles
- EP ID EP198930
- DOI 10.1515/amtm-2017-0006
- Views 57
- Downloads 0
Sensorless compensation system for thermal deformations of ball screws in machine tools drives
The article presents constructional, technological and operational issues associated with the compensation of thermal deformations of ball screw drives. Further, it demonstrates the analysis of a new sensorless compensat...
APPLICATION OF VISUAL SYSTEM FOR HAND CONTROL OF 3D MANIPULATOR
The article concerns controlling of a 3-axles manipulator by hand movement, recognized by visual system. In the investigations the Kinect sensor was used, which enabled the acquiring of 2D hand images with depth paramete...
The influence of geometric imperfections on the stability of threelayer beams with foam core
The main objective of this work is the numerical analysis (FE analysis) of stability of three-layer beams with metal foam core (alumina foam core). The beams were subjected to pure bending. The analysis of the local buck...
IDENTIFICATION OF THE PARAMETERS OF A BALL-SCREW MECHANISM MODEL
In this article a method for identification of the static properties of a ball-screw mechanism is shown. The nonlinearity of its deformation was shown experimentally. Then, a model of the mechanism was made and its param...
The influence of laser re-melting on microstructure and hardness of gas-nitrided steel
In this paper, modification of nitrided layer by laser re-melting was presented. The nitriding process has many advantageous properties. Controlled gas nitriding was carried out on 42CrMo4 steel. As a consequence of this...