IDENTIFICATION OF THE PARAMETERS OF A BALL-SCREW MECHANISM MODEL
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
In this article a method for identification of the static properties of a ball-screw mechanism is shown. The nonlinearity of its deformation was shown experimentally. Then, a model of the mechanism was made and its parameters were identified. The experimental results were summarized and compared with calculations. Recommendations were made for the modeling of carrying units containing ball-screw mechanisms.
Authors and Affiliations
Michał Dolata, Daniel Jastrzębski
Keywords
Related Articles
- EP ID EP198806
- DOI -
- Views 80
- Downloads 0
Comparison of various tool wear prediction methods during end milling of metal matrix composite
In this paper, the problem of tool wear prediction during milling of hard-to-cut metal matrix composite Duralcan™ was presented. The conducted research involved the measurements of acceleration of vibrations during milli...
The influence of geometric imperfections on the stability of threelayer beams with foam core
The main objective of this work is the numerical analysis (FE analysis) of stability of three-layer beams with metal foam core (alumina foam core). The beams were subjected to pure bending. The analysis of the local buck...
Austenite transformation simulation for a controlled rolling processing technology development
Using an originally-developed computer model and appropriate software the impact of deformation on austenite phase transformation in low carbon alloyed steel was carried out. The computer simulation takes into account an...
Stabilisation problem in biaxial platform
The article describes investigation of rolling ball stabilization problem on a biaxial platform. The aim of the control system proposed here is to stabilize ball moving on a plane in equilibrium point. The authors propos...
Determination of emissivity coefficient of heat-resistant super alloys and cemented carbide
This paper presents the analysis of emissivity engineering materials according to temperature. Experiment is concerned on difficult to machine materials, which may be turned with laser assisting. Cylindrical samples made...