THE QUALITY MODEL OF THE AWJ CUTTING PROCESS FOR ALUMINUM TYPE PA4 ALLOY
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
The article presents the quality model of the process of high-pressure abrasive waterjet cutting of aluminum alloy, type PA4, as well as the results of research that verified the accuracy of the determined dependence. The experimental works were performed on two experimental setups: machining AWJ center type RCT 32 by Resato company, as well as the prototype workstation constructed on the basis of plasma cut-off machine type TOPAZ-S by Eckert company. The geometric structure of the cut surfaces was measured using spatial profilometer Talysurf CLI 2000 equipped with a non-contact laser sensor. Nonlinear estimation module of Statistica program was used for qualitative development of the model of high-pressure abrasive aluminum alloy waterjet cutting process. The statistically elaborated dependence can be implemented in machine tool controllers designed for abrasive waterjet cutting of materials.
Authors and Affiliations
Marzena Sutowska
Keywords
Related Articles
- EP ID EP198780
- DOI -
- Views 74
- Downloads 0
Accuracy and repeatability positioning of high-performancel lathe for non-circular turning
This paper presents research on the accuracy and repeatability of CNC axis positioning in an innovative lathe with an additional Xs axis. This axis is used to perform movements synchronized with the angular position of t...
The influence of the type of coating on the cutting tool wear during turning of 316L austenitic stainless steel
The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of Ti...
The effect of changes in depth of cut and cutting speed of CNC toolpaths on turning process performance
In this article, a novel approach to computer optimization of CNC toolpaths by adjustment of cutting speed vc and depth of cut ap is presented. Available software works by the principle of adjusting feed rate on the basi...
The reliability of reproducing automotive components made by FDM printing in reverse engineering
The purpose of the article is to show the practical side of reverse engineering. Many times during the process of optimizing parts, before we intervene in the tool that produces them, we want to be sure that the optimiza...
INFLUENCE OF MACHINING OF EN-GJL-250 AND EN-GJS-400 CAST IRONS ON TRIBOLOGICAL BEHAVIOR
ectives of research on wear and friction is focused principally on solid lubrication. In the following paper, the tribological behaviors of two well-known, different cast irons, lamellar grey iron (EN-GJL-250) and sphero...