INFLUENCE OF MACHINING OF EN-GJL-250 AND EN-GJS-400 CAST IRONS ON TRIBOLOGICAL BEHAVIOR
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
ectives of research on wear and friction is focused principally on solid lubrication. In the following paper, the tribological behaviors of two well-known, different cast irons, lamellar grey iron (EN-GJL-250) and spheroidal graphite ductile iron (EN-GJS-400), are compared and the results are analyzed. For each material's family, the surfaces’ properties are characterized at different stages of the machining process. The particular influence of diverse feed rates in a turning facing is evaluated. Moreover, some tests of the laser cladding process, which contribute to the improvement of superficial properties, are carried out; therefore, the initial morphology before surface treatment is carefully characterized and evaluated in the context of subsequent adhesion qualification. The final goal of the study is to deliver feasible initial information concerning two similar cast irons that are traditionally used in the naval industry, which would be manufactured and employed in the future as dry lubricated bearings.
Authors and Affiliations
J. Martinez, A. Pereira, J. A. PÉREZ, T MATHIA
Identifying Combination of Friction Stir Welding Parameters to Maximize Strength of Lap Joints of AA2014-T6 Aluminum Alloy
AA2014 aluminum alloy (Al-Cu alloy) has been widely utilized in fabrication of lightweight structures like aircraft structures, demanding high strength to weight ratio and good corrosion resistance. The fusion welding of...
Wear Analysis of Cemented Carbide during Turning of Cast Iron Considering Economical Machining Speed
The purpose of this paper is to find economical machining speed during turning of grooves for piston rings with various feeds. In the first part of the paper, literature analysis concerning durability of cutting tools is...
AN OVERVIEW OF SELECTIVE LASER SINTERING TECHNOLOGIES
This paper presents an overview of the selective laser sintering (SLS) process of various materials. The influence of distinct scanning patterns and SLS process input parameters (e.g.: scanning rate, laser power, hatchin...
THE QUALITY MODEL OF THE AWJ CUTTING PROCESS FOR ALUMINUM TYPE PA4 ALLOY
The article presents the quality model of the process of high-pressure abrasive waterjet cutting of aluminum alloy, type PA4, as well as the results of research that verified the accuracy of the determined dependence. Th...
The influence of the type of coating on the cutting tool wear during turning of 316L austenitic stainless steel
The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of Ti...