Wear Analysis of Cemented Carbide during Turning of Cast Iron Considering Economical Machining Speed
Journal Title: Archives of Mechanical Technology and Materials - Year 2017, Vol 37, Issue
Abstract
The purpose of this paper is to find economical machining speed during turning of grooves for piston rings with various feeds. In the first part of the paper, literature analysis concerning durability of cutting tools is presented. Next, the wear of cemented carbide cutting tools during turning of cast iron is researched. The research has been done for seven cutting tools. During conducted turning trials, angular speed has been altered from n=530rev/min to n=710rev/min and feeds from f=0.007mm/rev to f=0.105mm/rev. On the basis of Taylor’s equation, which relates cutting speed to tool life, the economical cutting speed is established with the application of two various methods.
Authors and Affiliations
Natalia Znojkiewicz, Dariusz Korzeniewski, Martyna Wiciak
Keywords
Related Articles
- EP ID EP199052
- DOI 10.1515/amtm-2017-0004
- Views 68
- Downloads 0
Evaluating the Reliability of Groove Turning for Piston Rings in Combustion Engines with the Use of Neural Networks
The article describes a method of evaluating the reliability of groove turning for piston rings in combustion engines. Parameters representing the roughness of a machined surface, Ra and Rz, were selected for use in eval...
FACE GEAR WITH AN INVOLUTE TEETH LINE IN APPLICATIONS FOR CLUTCH CONNECTIONS
The paper presents methods of forming a face gear with an involute teeth line in application for clutch connections. The method is based on application of a disc tool instead of application of a hob. The solution is poss...
INFLUENCE OF PLASTICIZER TYPE ON PROPERTIES OF RENEWABLE ENGINEERING MATERIALS
Polymers and their composites are commonly used as engineering materials. They reveal a number of beneficial properties that allow their use in many industries. However, the main disadvantage of polymeric materials is th...
Determination of emissivity coefficient of heat-resistant super alloys and cemented carbide
This paper presents the analysis of emissivity engineering materials according to temperature. Experiment is concerned on difficult to machine materials, which may be turned with laser assisting. Cylindrical samples made...
The numerical investigation of thin-walled beams with modified C-sections
Demand for thin-walled structures has been increasing for many years. Cold-formed, thin-walled channel beams are the subject of presented research. The local elastic buckling and limit load of these beams subjected to pu...