A study of devices used for geometric parameter measurement of engineering building construction
Journal Title: Геодезія, картографія і аерофотознімання - Year 2018, Vol 87, Issue 1
Abstract
The aim. To study the abilities of electronic tacheometers to control geometric parameters of engineering constructions. Methods. The analysis of standard-setting documents for conducting geodetic works in industrial production and construction was carried out. The methods and devices used for this purpose were explored. Results. It is proposed to use electronic tacheometer and special methodology for such tasks. For this purpose, the research of a distance-measuring theodolite of an electronic tacheometer was conducted. In order to control the measurement of distances directly on the construction site, a 10-meter invar wire stand was developed, which was previously tested at the 1st-grade standard in the research institute of metrology with an accuracy of no greater than 0.01 mm. The method of transmission of reference distances, where special spheres and geodetic points are fixed by an aperture were developed. For direct measurements of the sections, the method of invar wire tensing was investigated, and mechanical balancing of the weighing system was performed. The control of the instrument's angular values was fulfilled on a higher-order metrological installation. The influence of non-perpendicular axes and eccentricity on the accuracy of angles measurement was established. To optimize pointing at a reflective mark, the design of the mark and the special bracket, which with the accuracy of not worse than 100, orientates the mark perpendicularly to the light beam of an electronic tachometer, was researched. The triple prism was also investigated, the relationship between height, diameter and reflection center was established. The design of a spherical reflector and a stand for laying runs with compensation of centering, reduction, and heights measurement of a device-reflector was developed. The construction of a bracket (vector) with two reflectors for the measurement work was developed. A three-dimensional model of an industrial object for optimal planning of places for fixing a geodetic basis and transition points of an electronic tacheometer was elaborated. Scientific novelty. The method of balancing forces in a geodetic tripod can be considered as the basis for the initiation of an automated centering of a device. Optical calculation of a triple prism can be used to determine a permanent of a geodetic device without measurements on the basis. The calculation of the optimal geodetic mark image provides unambiguous visibility and increases the accuracy of angular measurements. Practical significance. Using the developed method, it is possible with the help of any tacheometer to determine the spatial coordinates of an engineering construction with control and optimal accuracy.
Authors and Affiliations
A. I. Vivat, A. Tserklevych, O. M. Smirnova
Establishing the environmentally safe width of protective riparian zone along water bodies
Aim. Establishing protective riparian zonesalong the riversides of the Shopurka river inside water protection zones at the territory of urban settlement Velykyy Bytchkiv for protecting surface water bodies from polluting...
Study of dynamic processes of mining and industrial objects using methods of geoinformatic modelling
Purpose. The problem of application of thematic mapping in areas with man-made threats to which Dombrovski quarry in Kalush of Ivano-Frankivsk region relates is actual. Any way to eliminate these threats requires precise...
The possible uses of RTN-solutions for markup works on construction
The purpose of the research. Elaboration of practical recommendations concerning creation of a geodesic markup construction base with GNSS technologies, including Real Time Networks (RTN) methods. Methodology. To investi...
On the use of the set of geodetic networks for the surveying of land boundaries
Aim. Development of land use on land allocation in settlements of Ukraine is the most common and popular types of work on land management. For quality of their performance in the design of the boundaries of land in urban...
Cadastral land zoning
Purpose. Cadastral land zoning is one of the important components of creating a cadastral system in Ukraine, which helps to create an attractive investment climate and to define the priority areas of sustainable economic...