A Study on Stabilization of Expansive Soil with Ground Granulated Blast Furnace Slag and Flash
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 4
Abstract
Soil stabilization is one of most important for the construction which is widely used in connection with pavements and structures because it improves the engineering properties of soil. Utilization of industrial waste materials in the improvement of soils is a cost efficient and environmental friendly method. Stabilization of the expansive soil is studied by using flyash and Ground Granulated Blast Furnace. In the present investigation is to evaluate the compaction, CBR and unconfined compressive strength of stabilized black cotton soil using flyash and Ground Granulated Blast Furnace with different percentages. The geotechnical properties like compaction parameters has increased enabling increase California Bearing Ratio in both soaked and unsoaked conditions which indicates that improved in strength. From these results, it was found that optimum GGBS is 5 % and 5% flyash gives the maximum increment in the CBR and UCS values compared with all the other combinations.
Authors and Affiliations
S. Ammireddy, K. Sridevi, Ch. Sivanarayana, Dr. D S V Prasad
Optimizing Shared Resources in a Batch Production Process using Genetic Algorithm for Small Production Industry for Different Batch Condition
Mathematical optimization is a process for finding and selecting the best fit values that is used to solve various engineering problems. Along with a complex area, it is important to improve productivity and efficiency f...
Investigation and Study of Mechanical Properties of Areca Shell Fiber and Palm Powder Natural Composites
Natural fibers are considered to have potential use as reinforcing material in polymer matrix composites because of their good strength, stiffness, low cost, less weight and environment friendly. The interest in natural...
Pozzolanicity and Effectiveutilization of Agro-Waste Materials forConventional Concrete Production.
The need to reduce the high cost of Ordinary Portland Cement in order to provide accommodation for the populace has intensified research into the use of some locally available materials that could be used as partial repl...
Power Control in a Microgrid
A micro-grid is a unifying of micro-sources together with a load and an optional energy storage device within a vicinity. The micro-grid can be operated in either autonomous, non-autonomous or a dual operation. In an aut...
Investigation on Thermal Effects in Journal Bearing Using Bingham Lubrication
Hydrodynamic journal bearing are broadly utilized as a part of industry due to their effortlessness, efficiency and minimal effort. They support rotating shafts over various years and are regularly subjected to many stop...