Power Control in a Microgrid
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 5
Abstract
A micro-grid is a unifying of micro-sources together with a load and an optional energy storage device within a vicinity. The micro-grid can be operated in either autonomous, non-autonomous or a dual operation. In an autonomous operation micro-grid should generate its own energy and control it, as well. The components of the micro-grid which include 270kW of wind turbine, 40kW of micro-turbine, battery energy storage system with a capacity of 100kW and their control system have worked with each other in order to achieve power control in a micro-grid. The block diagram of the components and their parameters are made in a SIMULINK environment. The simulation test has been carried out by increasing the wind speed and decreasing the power demand in the system. Moreover, quick response of the battery energy storage system was observed in SIMULINK environment.
Authors and Affiliations
Salisu Abdullahi, Naseer Ullah
Keywords
Related Articles
- EP ID EP438553
- DOI 10.9790/1684-1505031621.
- Views 32
- Downloads 0
Use of Nano-Clay in Asphalt Binder Modification
In order to increase the life of bituminous pavement, performance of bitumen needs to be modified. The study was carried out to explore the addition effect of nanoclay on physical and mechanical propertieslike stiffness,...
Parametric Study of Laterally Loaded Pile Foundation
The pile foundation is an effective foundation system commonly used to support high rise buildings. The use of pile foundation tends to reduce the chances of displacement. In conventional analysis & design of laterally l...
Initiation and Propagation of Crack Due to Corrosion of Reinforcement - An Experimental Investigation
In the field of fracture mechanics of concrete as well as for health risk assessment of reinforced concrete structures in marine environment, the initiation and propagation of cracks due to corrosion of reinforcement pla...
Design And Experimental Evaluation of Steering Knuckle Arm For Stiffness
The scope of this dissertation shall undertake the structural loads of the `linear type' that could be critical for failure of the component. The evaluation of such loads and the influence of the same over the intended s...
Development of Quadratic Triangular (T6) Elements in Java
This study developed Quadratic Triangular (T6) elements using an object oriented approach and the Java programming language. A review of the work of Kansara (2004) and Nikishkov (2010) was conducted to develop a finite e...