A TUBE FLEXIBLE ASSEMBLY AND WELDING SYSTEM BASED ON PHOTOGRAMMETRY AND ROBOTS
Journal Title: Frontiers in Manufacturing Engineering (FME) - Year 2018, Vol 2, Issue 2
Abstract
To improve the efficiency and accuracy, as well as decrease the cost of the tube assembly and welding, this paper presents a tube flexible assembly and welding system based on the combination of photogrammetry and cooperating robots. This system consists of the measurement subsystem, the cooperating robot subsystem and the software subsystem. Based on these, the methods of calculating the allowance position for cutting and computing the posture of robots are proposed. A simulation process based on CATIA was built to verify the validity of the presented method. A control document, containing the information of robots’ kinematic parameter, can be created by the system and guide the cooperating robots to gripe, assemble and weld the tubes flexibly and rapidly.
Authors and Affiliations
Bin Qiao, Lianyu Zheng, Wei Fang
Keywords
Related Articles
- EP ID EP404445
- DOI 10.26480/fme.02.2018.04.06
- Views 28
- Downloads 0
A HYBRID GENETIC ALGORITHM TO SOLVE MULTI-OBJECTIVE FUZZY FLEXIBLE JOB SHOP SCHEDULING PROBLEM
In this paper, a hybrid genetic algorithm is introduced to overcome the toughest combinatorial optimization problem, the fuzzy-flexible job-shop scheduling. In consideration of the multi-product-and- small-batch producti...
SIMULATION OF ULTRASONIC FLOW POLISHING INSIDE THE MOLD CAVITY
The UDF program is written to simulate the cavitation characteristics of polishing media generated by ultrasonic vibration in the mold cavity based on CFD. The simulation results reveal the motion state of polishing medi...
FEMTOSECOND LASER SINGLE PULSE AND PULSE TRAINS ABLATION OF COPPER
The formation of nanostructures induced by femtosecond (fs) laser single pulse and pulse trains on copper (Cu) were systematically investigated. We found that the ablation size increases with the increasing of laser puls...
APPLICATION OF ADAPTIVE FUZZY SLIDING MODE CONTROL TO ALTERNATING CURRENT SERVOMOTOR SYSTEM
In the use of servo motor control system, some characteristics of motor, such as non-sinusoidal flux of motor mover caused by end effect, nonlinear friction, will make the effects of the servo system bad. So we must use...
MODELING AND SIMULATION OF AN AUTOMATIC BALANCE OSCILLATOR MECHANISM BASED ON ANSYS
In order to solve the problem of vibration caused by unbalance dynamic, and optimize certain parameters to improve the balance adjustment device of thermostatic oscillator, this paper introduces a method to simulating th...